Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
If your AGP card has "AGP 4X/8X (1.5V) notch"(show below), please make sure your AGP card is AGP 4X/8X (1.5V). AGP 4X/8X notch Caution: AGP 2X card is not supported by Intel® 845(GE/PE) / 845(E/ G) / 850(E) / E7205 / 865(G/PE/P) / 875P. You might experience system unable to boot up normally. Please insert an AGP 4X/8X card. Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V) mode by adjusting the jumper. The factory default for this card is 2X(3.3V). The GA-8IPE1000 Series (or any AGP 4X/8X only) motherboards might not function properly, if you install this card without switching the jumper to 4X(1.5V) mode in it. Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color", the graphics card manufacturer & some SiS 305 cards, their golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but they support 2X (3.3V) only. The GA-8IPE1000 Series (or any AGP 4X/8X only) motherboards might not function properly, If you install this card in it. Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage 128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V) specification. Therefore, AG32S(G) will work fine with Intel® 845(GE/PE) / 845(E/G) / 850(E) / E7205 / 865(G/PE/P) / 875P based motherboards. Before you install PCI cards, please remove the Dual BIOS label from PCI slots if there is one. • The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. • Third-party brands and names are the property of their respective owners. • Please do not remove any labels on motherboard, this may void the warranty of this motherboard. • Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet. Declaration of Conformity We, Manufacturer/Importer (full address) G.B.T. Technology Trading GMbH Ausschlager Weg 41, 1F, 20537 Hamburg, Germany declare that the product ( description of the apparatus, system, installat ion to which it refers) Mother Board GA-8IPE1000 Pro/GA-8IPE1000/GA-8IPE1000-L/GA-8IPE1000 Pro2 is in conformity with (reference to the specification under which conformit y is declared) in accordance with 89/336 EEC-EMC Directive • EN 55011 Limits and methods of measurement • EN 61000-3-2* Disturbances in supply systems cause of radio disturbance characteristics of • EN 60555-2 by household appliances and similar industrial,scientific and medical (ISM electrical equipment “Harmonics” high frequency equipment • EN 55013 Limits and methods of measurement • EN 61000-3-3* Disturbances in supply systems cause of radio disturbance characteristics of by household appliances and similar • EN 60555-3 broadcast receivers and associated electrical equipment “Voltage fluctuations” equipment • EN 55014 Limits and methods of measurement • EN 50081-1 Generic emission standard Part 1: of radio disturbance characteristics of Residual commercial and light industry household electrical appliances, portable tools and similar electrical • EN 50082-1 Generic immunity standard Part 1: apparatus Residual commercial and light industry • EN 55015 Limits and methods of measurement • EN 55081-2 Generic emission standard Part 2: of radio disturbance characteristics of Industrialenvironment fluorescent lamps and luminaries • EN 55020 Immunity from radio interference of • EN 55082-2 Generic emission standard Part 2: broadcast receivers and associated Industrialenvironment equipment • EN 55022 Limits and methods of measurement • ENV 55104 lmmunity requirements for household of radio disturbance characteristics of appliances tools and similar apparatus information technology equipment • DIN VDE 0855 Cabled distribution systems; Equipment • EN50091-2 EMC requirements for uninterruptible • part 10 for receiving and/or distribution from power systems (UPS) • part 12 sound and television signals (EC conformity marking) • CE marking The manufacturer also declares the conformity of above mentioned product with the actual required safety standards in accordance with LVD 73/23 EEC • EN 60065 Safety requirements for mains operated • EN 60950 Safety for information technology equipment electronic and related apparatus for including electricalbussiness equipment household and similar general use • EN 60335 Safety of household and similar • EN 50091-1 General and Safety requirements for electrical appliances uninterruptible power systems (UPS) Manufacturer/Importer Signature: Timmy Huang (Stamp) Date : July 22, 2003 Name: Timmy Huang FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109 (a),Class B Digital Device DECLARATION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible Party Name: Address: Phone/Fax No: hereby declares that the product Product Name: Conforms to the following specifications: This device complies with part 15 of the FCC Rule...