Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• !!!!!AC Back Function !Memory System power on depends on the status before AC lost. !Soft-Off Always in Off state when AC back. (Default value) !Full-On Always power on the system when AC back. GA-8GE800 Motherboard - 40 PnP/PCI Configurations CMOS Setup Utility-Copyright (C) 1984-2003 Award Software PnP/PCI Configurations PCI 1/5 IRQ Assignment PCI 2 IRQ Assignment PCI 3 IRQ Assignment PCI 4 IRQ Assignment [Auto] [Auto] [Auto] [Auto] Item HelpMenu Level & Device(s) using this INT: Display Cntrlr -BUS 1 Dev 0 Func 0 • • "#$%: Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save F6:Fail-Safe Defaults ESC:Exit F1:General HelpF7:Optimized Defaults Figure 6: PnP/PCI Configurations PCI 1/5 IRQ Assignment Auto Auto assign IRQ to PCI 1/5. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1/5. PCI 2 IRQ Assignment Auto Auto assign IRQ to PCI 2. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2. PCI 3 IRQ Assignment Auto Auto assign IRQ to PCI 3. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3. PCI 4 IRQ Assignment Auto Auto assign IRQ to PCI 4. (Default value) 3,4,5,7,9,10,11,12,14,15 Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 4. English - 41 -BIOS Setup English PC Health Status CMOS Setup Utility-Copyright (C) 1984-2003 Award Software PC Health Status Reset Case Open Status Case Opened VCORE VCC18 +3.3V +5V +12V Current CPU Temperature Current CPU FAN Speed Current SYSTEM FAN SpeedCPU Warning Temperature CPU FAN Fail Warning SYSTEM FAN Fail Warning [Disabled] Yes 1.696V 1.776V 3.248V 5.134V 12.288V 33oC 4440 RPM 0 RPM [Disabled] [Disabled] [Disabled] Item Help Menu Level • [Disabled] Don't reset case open status [Enabled] Clear case open status at next boot • • "#$%: Move Enter:Select F5:Previous Values +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F6:Fail-Safe Defaults F7:Optimized Defaults Figure 7: PC Health Status • !!!!!Reset Case Open Status • !!!!!Case Opened If the case is closed, "Case Opened" will show "No". If the case have been opened, "Case Opened" will show "Yes". If you want to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and save CMOS, your computer will restart. • !!!!!Current Voltage (V) VCORE / +1.5V / +3.3V / +5V / +12V !Detect system's voltage status automatically. • !!!!!Current CPU Temperature !Detect CPU Temp. automatically. GA-8GE800 Motherboard - 42 • !!!!!Current CPU/SYSTEM FAN Speed (RPM) !Detect CPU/SYSTEM Fan speed status automatically. • !!!!! CPU Warning Temperature !60oC / 140oF Monitor CPU Temp. at 60oC / 140oF. !70oC / 158oF Monitor CPU Temp. at 70oC / 158oF. !80oC / 176oF Monitor CPU Temp. at 80oC / 176oF. !90oC / 194oF Monitor CPU Temp. at 90oC / 194oF. !Disabled Disable this function.(Default value) • !!!!!CPU FAN Fail Warning !Disabled Fan Warning Function Disable. (Default value) !Enabled Fan Warning Function Enable. • !!!!!SYSTEM FAN Fail Warning !Disabled Fan Warning Function Disable. (Default value) !Enabled Fan Warning Function Enable. English -43 -BIOS Setup English Frequency/Voltage Control CMOS Setup Utility-Copyright (C) 1984-2003 Award Software Frequency/Voltage Control CPU Clock Ratio [15X] CPU Host Clock Control [Disabled] • CPU Host Frequency (Mhz) 100 • Fixed PCI/AGP Frequency 33/66 Host/DRAM Clock ratio [Auto] Memory Frequency (Mhz) 266 PCI/AGP Frequency (Mhz) 33/66 DIMM OverVoltage Control [Normal] AGP OverVoltage Control [Normal] Item Help Menu Level • • • "#$%: Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults Figure 8: Frequency/Voltage Control "Those items will be available when "CPU Host Clock Control" is set to Enabled. • !!!!!CPU Clock Ratio Set CPU Ratio if CPU Ratio is unlocked. !10X~24X It's depends on CPU Clock Ratio. • !!!!!CPU Host Clock Control Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot. When time out occur, system will reset and run at CPU default Host clock at next boot. !Disable Disable CPU Host Clock Control. (Default value) !Enable Enable CPU Host Clock Control. • !!!!!CPU Host Frequency (MHz) !100MHz ~ 355MHz Set CPU Host Clock from 100MHz to 355MHz. Incorrect using it may cause your system broken. For power End-User use only! GA-8GE800 Motherboard - 44 • !!!!! Fixed PCI/AGP Frequency !You can choose those mode to adjust PCI/AGP frequency. (Select PCI/AGP frequency asynchronous with CPU frequency). • !!!!!Host/DRAM Clock Ratio (Warning: wrong frequency may make system can't boot, clear CMOS to overcome wrong frequency issue) !2.0 Memory Frequency = Host clock X 2.0. !2.66 Memory Frequency = Host clock X 2.66. !Auto Set Memory frequency by DRAM SPD data. (Default value) • !!!!!Memory Frequency(Mhz) !The values depend on CPU Host Frequency(Mhz) . • !!!!! PCI/AGP Frequency(Mhz) !The values depend on Fixed PCI/AGP Frequency. • !!!!!DIMM OverVoltage Control !Normal Set DIMM OverVolt...