Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend you not to alter the default settings to prevent system instability or other unexpected results. (Inadequately altering the settings may result in system's failure to boot. If this occurs, clear the CMOS values and reset the board to default values.) When the ••System Voltage Optimized item blinks in red, it is recommended that you set the System Voltage Control item to Auto to optimize the system voltage settings. IGX Configuration`` CMOS Setup Utility-Copyright (C) 1984-2012 Award Software IGX Configuration Item Help Menu Level .. Internal Graphics Mode [UMA] UMA Frame Buffer Size [Auto] x Surround View Disabled VGA Core Clock control [Auto] x VGA Core Clock(MHz) 500 ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Internal Graphics Mode&& Allows you to determine whether to allocate system memory for the onboard graphics controller. Disabled Disables the onboard graphics controller. UMA Allocates memory for the onboard graphics controller from the system memory. (Default) UMA Frame Buffer Size&& Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. Options are: Auto (default), 256MB, 512MB, 1024MB. (Note) This item is present only when you install a CPU that supports this feature. Surround View&& Enables or disables the Surround View function. This option is configurable only when Init Display First under Advanced BIOS Features is set to PEG and an AMD/ATI graphics card is installed. (Default: Disabled) VGA Core Clock control&& Allows you to determine whether to manually set the VGA Core clock. (Default: Auto) VGA Core Clock(MHz)&& Allows you to manually set the VGA Core clock. The adjustable range is from 300 MHz to 2000 MHz. This item is configurable only if the VGA Core Clock control option is set to Manual. CPU Clock Ratio&& Allows you to alter the clock ratio for the installed CPU. The adjustable range is dependent on the CPU being installed. CPU NB Clock Divisor &&(Note) Allows you to set the CPU North Bridge frequency divisor. Core Performance Boost&& (Note) Allows you to determine whether to enable the Core Performance Boost (CPB) technology, a CPU performance-boost technology. (Default: Enabled) CPB Ratio&& (Note) Allows you alter the ratio for the CPB. The adjustable range is dependent on the CPU being installed. (Default: Auto) CPU Host Clock Control&& Enables or disables the control of CPU host clock. Auto (default) allows the BIOS to automatically adjust the CPU host frequency. Manual allows the CPU Frequency (MHz) item below to be configurable. Note: If your system fails to boot after overclocking, please wait for 20 seconds to allow for automated system reboot, or clear the CMOS values to reset the board to default values. CPU Frequency(MHz) Allows you to manually set the CPU host frequency. This option is configurable only when CPU Host Clock Control is set to Manual. Important It is highly recommended that the CPU frequency be set in accordance with the CPU specifications. PCIe Spread Spectrum&& Enables or disables PCIe Spread Spectrum. (Default: Disabled) DRAM E.O.C.P&& Allows you to determine whether to use the preset memory overclocking profile to achieve optimum overclocking performance. (Default: Disabled) Set Memory Clock&& Determines whether to manually set the memory clock. Auto lets BIOS automatically set the memory clock as required. Manual allows the memory clock control item below to be configurable. (Default: Auto) Memory Clock&& This option is configurable only when Set Memory Clock is set to Manual. Options are: X5.33, X6.66, X8.00, and X9.33. (Note) This item is present only when you install a CPU that supports this feature. DRAM Configuration&& CMOS Setup Utility-Copyright (C) 1984-2012 Award Software DRAM Configuration Item Help Menu Level . DDR3 Timing Items [Auto] SPD Auto x 1T/2T Command Timing Auto -- -- x CAS# latency Auto 9T 9T x RAS to CAS R/W Delay Auto 9T 9T x Row Precharge Time Auto 9T 9T x Minimum RAS Active Time Auto 24T 24T x TwTr Command Delay Auto 5T 5T x Trfc0 for DIMM1, 3 Auto 110ns 110ns x Trfc1 for DIMM2, 4 Auto -- -- x Write Recovery Time Auto 10T 6T x Precharge Time Auto 5T 4T x Row Cycle Time Auto 33T 20T x RAS to RAS Delay Auto 4T 4T x Four Bank Activate Windows Auto -- -- **DCTs Drive Strength** DCT0 DCT1 Proc0dt (ohms) [Auto] 60 [Auto] 240 DQS Drive Strength [Auto] 1.0x [Auto] 1.5x Data Drive Strength [Auto] 1.0x [Auto] 1.5x MEMCLK Drive Strength [Auto] 1.25x [Auto] 1.5x Addr/Cmd Drive Strength [Auto] 1.5x [Auto] 2.0x CS/ODT Drive Strength [Auto] 1.5x [Auto] 2.0x CKE Drive Strength [Auto] 1.5x [Auto] 2.0x **DCTs Addr/Cmd Timing** DCT0 DCT1 Addr/Cmd Setu...