Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
(Self Monitoring and Reporting Technology) capability of your hard drive. This feature allows your system to report read/write errors of the hard drive and to issue warnings when a third party hardware monitor utility is installed. (Default: Disabled) Away Mode Enables or disables Away Mode in Windows XP Media Center operating system. Away Mode allows the system to silently perform unattended tasks while in a low-power mode that appears off (Default: Disabled) Backup BIOS Image to HDD Allows the system to copy the BIOS image file to the hard drive. If the system BIOS is corrupted, it will be recovered from this image file. (Default: Enabled) Hybrid SLI Enables or disables the Hybrid SLI function. This item is automatically set to Enabled when a Hybrid SLI-supported graphics card is installed. Display Detection This item is configuable when Hybrid SLI is enabled. Enabled allows the BIOS to automatically detect whether the current display is from the onboard VGA or a PCI Express graphics card and to change the current display if it is different from the Init Diplay First setting. Init Display First Specifies the first initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card or the onboard VGA. (Only Onboard VGA and PEG are available for selection when Hybrid SLI is enabled.) PCI Slot Sets the PCI graphics card as the first display. Onboard VGA Sets the onboard VGA as the first display. PEG Sets the PCI Express graphics card oas the first display. (Default) iGPU Frame Buffer Control Determines whether to manually set the Frame Buffer Size. Auto lets the BIOS automatically set the Frame Buffer Size as required. Manual allows the Frame Buffer Size item below to be configurable. (Default: Auto. This item is automatically set to Manual when Hybrid SLI is enabled.) GA-M85M-US2H Motherboard - 44 Frame Buffer Size Frame buffer size is the total amount of system memory allocated solely for the onboard graphics controller. MS-DOS, for example, will use only this memory for display. This item is configurable only if the iGPU Frame Buffer Control option is set to Manual. Options are: 128M (default), 256M, 512M. (Only 256M and 512M are available for selection when Hybrid SLI is enabled.) Onboard GPU Enables or disables the onboard VGA function. Enable If No Ext PEG Activates the onboard VGA only if no PCI Express VGA card is installed. (Default) Always Enable Always activates the onboard VGA, whether or not a PCI Express card is installed. If you wish to set up a dual view configuration, set this item to Always Enable. This item is automatically set to Always Enable when Hybrid SLI is enabled. - 45 -BIOS Setup 2-6 Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2009 Award Software Integrated Peripherals On-Chip IDE Channel [Enabled] NV SATA Controller [Enabled] Onchip SATA Mode [IDE] Onboard Audio Function [Auto] HDMI Audio [Auto] On-Chip MAC Lan [Auto] .SMART LAN [Press Enter] Onboard LAN Boot ROM [Disabled] Onboard Serial Port [3F8/IRQ4] Onboard Parallel Port [378/IRQ7] Parallel Port Mode [SPP] x ECP Mode Use DMA 3 OnChip USB [V1.1+V2.0] USB Memory Type [SHADOW] USB Keyboard Support [Disabled] USB Mouse Support [Disabled] Legacy USB storage detect [Enabled] ....: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults Item Help Menu Level. On-Chip IDE Channel Enables or disables the integrated IDE controller. (Default: Enabled) NV SATA Controller Enables or disables the integrated SATA controller. (Default: Enabled) Onchip SATA Mode Enables or disables RAID for the SATA controller integrated in the NVIDIA® GeForce 8200 chipset or configures the SATA controller to AHCI mode. IDE Disables RAID for the SATA controller and configures the SATA controller to PATA mode. (Default) AHCI Configures the SATA controller to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. RAID Enables RAID for the SATA controller. Onboard Audio Function Enables or disables the onboard audio function. (Default: Auto) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. HDMI Audio Enables or disables the chipset-integrated HDMI audio function. (Default: Auto) On-Chip MAC Lan Enables or disables the onboard LAN function. (Default: Auto) If you wish to install a 3rd party add-in network card instead of using the onboard LAN, set this item to Disabled. GA-M85M-US2H Motherboard - 46 SMART LAN (LAN Cable Diagnostic Function) CMOS Setup Utility-Copyright (C) 1984-2009 Award Software SMART LAN Item Help Menu Level. Start detecting at Port..... Part1-2 Status Open / Length 0 m Part3-6 Status Open / Length 0 m Part4-5 Status Open / Length 0 m Part7-8 Status Open / Length 0 m ....: Move Enter: Select +/-/PU/PD: Value F...