Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.” These words mean: DANGERWARNING You can be killed or seriously injured if you don’t immediately follow instructions. You can be killed or seriously injured if you don’t follow instructions. All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed. English IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed including the following: 1. Read all instructions. 2. To protect against risk of electrical shock, do not put Stand Mixer in water or other liquid. 3. The appliance is not intended for use by young children or infirm persons without supervision. 4. Unplug Stand Mixer from outlet when not in use, before putting on or taking off parts and before cleaning. 5. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from beater during operation to reduce the risk of injury to persons and/or damage to the Stand Mixer. 6. Do not operate Stand Mixer with a damaged cord or plug or after the Stand Mixer malfunctions, or is dropped or damaged in any manner. Return appliance to the nearest Authorized Service Center for examination, repair or electrical or mechanical adjustment. 7. The use of attachments not recommended or sold by KitchenAid may cause fire, electrical shock or injury. 8. Do not use the Stand Mixer outdoors. 9. Do not let the cord hang over edge of table or counter. 10. Remove flat beater, wire whip or dough hook from Stand Mixer before washing. 11. This product is designed for household use only. SAVE THESE INSTRUCTIONS 1 EnglishEnglish This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The symbol on the product, or on the documents accompanying the product, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Disposal must be carried out in accordance with local environmental regulations for waste disposal. For more detailed information about treatment, recovery and recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product. Electrical Requirements Your Stand Mixer operates on a regular 220-240 volt A.C., 50/60 hertz house current. The wattage rating for your Stand Mixer is printed on the trim band. This wattage is determined by using the attachment which draws the greatest power. Other recommended attachments may draw significantly less power. Do not use an extension cord. If the power supply cord is too short, have a qualified electrician or serviceman install an outlet near the appliance. 2 5K45SS Tilt-Head Stand Mixer Features Attachment Hub Motor Head Attachment Knob 10 21 4 6 8 O CAUTION:Unplugbeforeinsertingofremovingparts K itc h e n A id S t.Joseph,M ich igan U S A Beater Height Adjustment Screw Motor Head Locking Lever (not shown) Flat Beater Wire Whip Dough Hook Speed Control Lever Bowl Clamping Plate Beater Shaft 4,25 liter (4.5 qrt) Stainless Steel Bowl English 3 English 4 Motor Head Beater Height Adjustment Screw Motor Head Locking Lever (not shown) Attachment Knob Attachment Hub Flat Beater Wire Whip Dough Hook Speed Control Lever Bowl Clamping Plate Beater Shaft 4,8 liter (5 qrt) stainless steel bowl 5KSM150PS Tilt-Head Stand Mixer Features Pouring Shield Assembling Your Tilt-Head Stand Mixer To Attach Bowl 1. Turn speed control to “O”. 2. Unplug stand mixer or disconnect power. 3. Hold the locking lever in the UNLOCK position and tilt motor head back. 4. Place bowl on bowl clamping plate. 5. Turn bowl gently in clockwise direction. To Remove Bowl 1. Turn speed control to “O”. 2. Unplug stand mixer or disconnect power. 3. Hold the locking lever in the UNLOCK position and tilt motor head back. urn bowl counterclockwise. Pin To Attach Flat Beater, Wire Whip, or Dough Hook 1. Turn speed control to “O”. 2. Unplug stand mixer or disconnect power. 3. Hold the locking lever in the UNLOCK position and raise motor head. 4. Slip beater onto beater shaft and press upward as far as possible. 5. Turn beater to right, hooking beater over pin on shaft. To Remove Flat Beater, Wire Whip, or Dough Hook 1. Turn speed control to “O”. 2....