Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
1. Place power unit on suitable work surface. Before using the machine with any of the attachments, the power unit should be placed on a suitable work surface. The surface should be sturdy, smooth and clean; make sure that there is no flour or oil on the surface. A clean smooth surface will provide the best footing and will limit slipping and/or “walking.” 2. Plug power unit into power supply. Pull the electrical cord or unwind the electrical cord to appropriate length. Make sure power unit is turned to Off “O/Off” and plug it into a convenient nearby receptacle. Turn rotary knob to park “P” position to make sure the drives are in proper position to rotate arm and/or install attachment. If motor does not reposition drives when turned to “P” position, the drives were already in position for arm to be rotated. WARNING 1. Do not twist or attempt to push in the electrical cord. If the cord becomes jammed, pull out the cord to its full length and then allow it to slowly retract. 2. If the power should be interrupted, the power unit will remain on and will restart when power is restored. 3. Remove drive cover. Remove drive cover from drive to be used, if necessary, see figure 2c. 4. Select attachment to be used. Select attachment you wish to use. Reposition the ergonomic multifunction arm, if necessary (see figure 4a & 4b), and place attachment on power unit. The Bosch Compact Series Kitchen Machine uses its attachments in 6 modes. The various modes used (the drive and position of the arm) are shown in table 1. Table 1. See specific instructions for attachment selected. Specific instructions are located on pages listed below: Attachment Pages Mixing bowl w/dough hooks ..... 10–11 Mixing bowl w/whisks............... 11–13 Blender ..................................... 13–15 Continuous shredder............... 16–18 Table 2. 8 5. Operate unit with rotary switch. Once the attachment is in place, the speed of its moving components can be controlled through the use of the rotary switch at the side of the ergonomic multifunction arm. See figure 2a. The rotary switch has six positions: a. “P,” a park position used to “park” the drive unit prior to changing the positions of the ergonomic multifunction arm. b. “O/Off,” the off position. c. Four speeds labeled 1, 2, 3 and 4. Speed 1 is the lowest speed. The speed increases with each succeeding step up to the highest speed, speed 4. All models of the Bosch Compact Series Kitchen Machines incorporate an electronic safety control to protect the motor. If the safety becomes activated, the motor will stop running. Turn the machine to off and allow to cool. See TROUBLESHOOTING at the back of this manual. WARNING Operate the appliance with the attachments in their operating positions, as shown in table 1, only. Do not operate at no load. 6. Turn power unit off. When your work with the attachment is completed or the capacity of the batch feed attachment has been reached, turn the power unit to off position, “O/Off,” turn the rotary knob to the “P,” park position, to place the drives to their parked positio...
Otros modelos de este manual:Mezcladoras - MUM 4405 UC (1.48 mb)
Mezcladoras - MUM 4405 UC (1.48 mb)
Mezcladoras - MUM 4420 UC (1.48 mb)
Mezcladoras - MUM 4620 UC (1.48 mb)