Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Open the wire cage. 2. Place the mixing bowl on the bowl support. 3. Pour ingredients into the bowl. 4. Swing the bowl back to the locked position. 5. Place the agitator inside the bowl, then attach it to the agitator shaft. 6. Return the wire cage to front-center position. 7. Push and hold the up arrow on the bowl switch until the bowl reaches the mix position and stops. 8. The mixer is now ready for mixing. (See Timer Operation.) Fig. 14 TIMER OPERATION Using the Count-Up Mode (Continuous Mixing) 1. Turn the SPEED dial to select a mix speed (the SPEED setting can be changed at any time during the mixing operation). NOTE: STIR is to be used for incorporating ingredients. Do not use to develop dough products. 2. Set the timer on hold by turning the TIME selector counterclockwise until "Hold" appears in the TIME window. 3. Press the START button to begin mixing. The timer starts counting forward from 00:00. NOTE: If the wire cage is opened at any time, the mixing operation will stop. To resume the mixing operation, close the wire cage and press the START button. 4. Use the STOP button to stop the mixer; the mixing time is displayed in the TIME window. 5. Press the START button to resume mixing if needed. NOTE: When the timer reaches 50:00 minutes, it will rollover to 00:01 and continue counting until the STOP button is pressed. – 12 – Using the Count-Down Mode (Timed Mixing) Using the Count-Down Mode (Timed Mixing) . Turn the SPEED dial to select a mix speed. a. If the count-up mode was used for the previous batch, the desired time needs to be entered. b. If the count-down mode was used for the previous batch, the previous time will be displayed. If a different time is needed, turn the TIME selector to the desired time. 2. Press the START button to begin mixing; the timer starts counting down from the set time. a. To stop the mixer at any time, press the STOP button. To resume mixing, press the START button. For example: The mixer is started at SPEED 1 for 30 seconds and is stopped after 10 seconds. Pressing the START button will resume the mixing operation. b. If the mixer is stopped and a new time setting is entered, pressing the START button saves the new time setting on the current speed selection. For example: The mixer is started at SPEED 1 for 30 seconds and is stopped after 10 seconds. A new time is entered by turning the TIME selector. The new time will replace the initial 30 seconds for SPEED 1 after the START button is pressed. c. If the time is changed while mixing, the mixer will operate until the new time expires. The adjustment to the time will not be stored. d. If speed is changed while mixing, the time will change to the previous time for the selected speed and count down. NOTE: If the wire cage is opened at any time, the mixing operation will stop. To resume the mixing operation, close the wire cage and press the START button. 3. When the timer reaches 00:00, the mixer stops; a beeper sounds for 3 seconds. The count-down timer displays the last-entered time. OPERATING NOTES • STIR is to be used for incorporating ingredients. Do not use it to develop dough products. • If the mixer is stopped during a mixing operation, the timer also stops. The timer starts again where it left off when the START button is pressed. • The SPEED window will display the current SPEED selection. • Turn the TIME selector clockwise to take the mixer out of the hold mode. – 13 – Recipe Mode — To Enter and Exit Reviewing Recipe Steps OF STEPS SPEED TIME _ _ 1 05:30 OF STEPS SPEED TIME Recipe 1 1 3 1 04:45 OF STEPS SPEED TIME 2 3 PAUS 00:30 OF STEPS SPEED TIME 3 3 3 04:30 OF STEPS SPEED TIME 1 3 1 04:45 Recipe 1 Recipe Mode — To Enter and Exit Reviewing Recipe Steps OF STEPS SPEED TIME _ _ 1 05:30 OF STEPS SPEED TIME Recipe 1 1 3 1 04:45 OF STEPS SPEED TIME 2 3 PAUS 00:30 OF STEPS SPEED TIME 3 3 3 04:30 OF STEPS SPEED TIME 1 3 1 04:45 Recipe 1 Running a Recipe OF STEPS SPEED TIME 1 3 1 00:00 OF STEPS SPEED TIME 3 3 3 04:303 OF STEPS SPEED TIME 3 3 3 00:00 OF STEPS SPEED TIME Recipe 1 1 3 1 04:45 Running a Recipe OF STEPS SPEED TIME 1 3 1 00:00 OF STEPS SPEED TIME 3 3 3 04:303 OF STEPS SPEED TIME 3 3 3 00:00 OF STEPS SPEED TIME Recipe 1 1 3 1 04:45 Interrupting a Recipe OF STEPS SPEED TIME 1 3 1 04:21 • Select the desired recipe by pressing the recipe button. The button lights and step one of the recipe displays. • Press START. • The mixer begins to run step 1 of the programmed recipe. The timer display indicates the mixer speed and counts down the remaining time. • When the time expires, the mixer automatically switches to the speed and time for the next recipe step and continues mixing. Mixing steps run in succession at the programmed speed and time. • If a Pause step is programmed in the recipe, the mixer stops and the time display counts down the pause time to 00:00 and beeps. OF STEPS SPEED TIME 2 3 PAUS 00:30 • After a Pause step, the speed display for the next step flashes; press START when ready to resume mixing...
Otros modelos de este manual:Mezcladoras - LEGACY ML-134334 (2.59 mb)