Votos - 3, Puntuación media: 3.7 ( )

Fabricar: Craftsman Tamaño del archivo: 1.54 mb Nombre del archivo: Idioma del manual:

2. Disconnect spark plug wire. 3. Pull trigger on gun handle to relieve any water pressure. 4. Disconnect the wand from the gun. 5. Remove the nozzle from the end of the wand with the 2mm allen wrench provided as shown. 6. Clean the nozzle using the nozzle cleaner provided or a straightened paper clip. Insert into the nozzle end and work back and forth until obstruction is removed. 8. Reassemble the nozzle to the wand. Tighten securely to prevent leaks. 9. Reconnect wand to gun and turn on water supply. 10. Start pressure washer and place wand into high pressure setting to test. Quick Connect Turret (PCH2425, PCH2627, PCH3030, PCH3540HR): 1. Shut off the pressure washer and turn off the water supply. 2. Disconnect spark plug wire. 3. Pull trigger on gun handle to relieve any water pressure. 4. Disconnect the wand from the gun. 5. Remove any obstructions with the nozzle cleaning tool provided and backflush with clean water. 6. Direct water supply into nozzle end to backflush loosened particles for 30 seconds. 7. Reconnect wand to gun and turn on water supply. 7. Direct water supply into nozzle end to backflush 8. Start pressure washer and place wand into high loosened particles for 30 seconds. pressure setting to test. 14 — ENG D22885 DAPC Axial Cam (PCH2425) HOW TO CLEAN THE WATER INLET FILTER This screen filter should be checked periodically and cleaned if necessary. 1. Remove filter by grasping end and removing it from water inlet of pump as shown. 2. Clean filter by flushing it with water on both sides. 3. Install filter into water inlet of pump Annovi Reverberi (PCH2627, PCH3030) HOW TO CHANGE PUMP OIL 1. Loosen oil fill cap. 2. Place a container under the oil drain plug. 3. Remove oil drain plug. 4. After oil is drained replace oil drain plug. Tighten securely. 5. Remove oil fill cap and fill with recommended oil. See the Pump Maintenance Chart for the correct amount and type of oil. 6. Replace oil fill cap and tighten securely. Oil Drain Plug CAT (PCH3540) Oil Fill Plug Oil Drain Plug 15 — ENG D22885 STORAGE It is recommended that you follow these steps to protect the internal seals of the pressure washer when storing the unit for an extended period and WHEN FREEZING TEMPERATURES ARE EXPECTED. ENGINE 1. Consult the Engine Owners Manual for the manufacturer's recommendations for storage. PUMP NOTE: If storing the unit for more than 30 days RV antifreeze needs to be run through the pump. This helps prevent damage within the pump head. RV antifreeze is not only added for winterizing, but for proper lubrication regardless of temperature or environment. Storing the pump less than 30 days does not require the RV antifreeze. 1. Obtain a funnel, six ounces of RV antifreeze, and approximately 12 inches of garden hose with a male hose connector attached to one end. Use only RV antifreeze. Any other antifreeze is corrosive and can damage pump. 2. Disconnect spark plug wire. 3. Disconnect high pressure hose from pump and from spray gun. 4. Connect 12 i...

Descargar ahora

Introduzca dos números de la imagen: