Iniciar sesión:
Votos - 4, Puntuación media: 3.8 ( )

Manual de usuario Craftsman, modelo 580.7622

Fabricar: Craftsman
Tamaño del archivo: 2.57 mb
Nombre del archivo: L0909032.pdf
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


-Fri. 8 a.m. to 5 p.m. (CST) SEARS, ROEBUCK and CO., Hoffrnan Estates, IL 60179 U.S.A. Part No. B2620 DraI_ 0 (2/5197) SAFETY RULES ............................ 3 STOP,AGE ............................... 14 ASSEMBLY .............................. 4-5 TROUBLESHOOTING ....................... 15 OPERATION ............................. 6-9 REPLACEMENT PARTS ........... : ...... 16-27 MAINTENANCE ........................ 10-13 HOW TO ORDER PARTS ............ BACK PAGE LIMITED ONE YEAR WARRANTY ON CRAFTSMAN HIGH PRESSURE WASHER For one year from the date of purchase, when this Craftsman High Pressure Washer is maintained and operated according to the instructions in the owner's manual, Sears will repair, free of charge, any defect in matedal and workmanship. if this high pressure washer is used for commercial purposes; this warranty applies for only 90 days from the date of purchase, tf this high pressure washer is used for rental purposes, this warranty applies for only 30 days after date of purchase. This warranty does not cover: o ..Expendable items such as spark plugs and air filters, which become worn during normal use. o Repairs necessary because of operator abuse or negligence, includingdamage resultingfrom no water being supplied to pump or failure to maintain the equipment accordingto the instructionscontained in the owner's manual. WARRANTY SERVICE IS AVAILABLE BY RETURNING THE HIGH PRESSURE WASHER TO THE NEAREST SEARS SERVICE CENTER OR DEALER IN THE UNITED STATES. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state. SEARS, ROEBUCK AND CO., D/817 WA, Hoffman Estates, IL 60179 NOT CONTACT SPARK PLUG, TO PREVENT ACCIDENTAL STARTING WHEN SETTING UP, CAUTION: ALWAYS DISCONNECT SPARK PLUG WIRE AND PLACE WIRE WHERE IT CAN TRANSPORTING, ADJUSTING OR MAKING REPAIRS TO YOUR HIGH PRESSURE WASHER. read this manual and follow all Safety _ AUTION: Before using this product, Rules and Operating instructions. o Engine exhaust gases contain DEADLY carbon monoxide gas. This dangerous gas, if breathed in sufficient concentrations, can cause unconsciousness or even death. Operate this equipment only in the open air where ade quate ventilation is available. o Gasoline is highly FLAMMABLE and itsvapors are EXPLOSIVE. Do not permit smoking, open flames, sparks or heat in the vicinity while handling gasoline. Avoid spilling gasoline on a hot engine. Allow unit to coot for 2 minutes before refueling. Comply with all laws regulating storage and handling of gasoline. o Locate this pressure washer in areas away from combustible materials, combustible fumes or dust. The high pressure equipment is designed to be used with Sears authorized parts only. if you use this equipment with parts that do notcomply with minimum specifications, the user assumes all risks and liabilities. ° Some chemicals or detergents may be harmful if inhaled or ingested,causing severe nausea, fainting or poisoning. The harmful elements may cause property damage or severe injury. Do not allow CHILDREN to operate the Pressure Washer at any time. o Operate engine only at governed speed. Running the engineat excessive speeds increasesthe hazard of personal injury.Do net tamper with parts which may increase or decrease the governed speed. o Do not wear loose clothing, jewelryor anything that may be caught in the starter or other rotating parts. o Before starting the Pressure Washer in cold weather, check all parts of the equipmentand be sure ice has not formed there. o Units with broken or missing parts, or without protecWe housing or covers should NEVER be operated. • The muffler and air cleaner must be installed and in good condition before operating the Pressure Washer. These components act as spark arrestors if the engine backfires. o Check thefuel system for leaks or signs of deterioration such as chafed or spongy hose, loose or missing clamps ordamaged tank or cap. Correct all defects before operating the PressureWasher. o Do not spray flammable liquids. o Never allow any part of the body to come in contactwith the fluid stream. DO NOT come in contact with a fluid stream created by a leak in the high pressurehose. o High pressurestreams of fluid thisequipment produces can pierce skin and its underlyingtissues, leading to serious injury and possible amputation. o Never aim tile gun at people, animals or plants. -High pressurespray can cause paint chips or other pa_cies to become airborne and fly at high speeds. o Nways weareyeprotectionwhen you usethisequipmentor when you arein the vicinitywherethe equipmentis in use. , Operate the pressure at no more than the PSI fluid pressure rated for your pressurewasher. o Never move the machine by pulling on the high pressure hose. Use the handle provided on the top of the unit. o Always be certain the spray gun, nozzles and accessories are correctly attached. • Never use a spraygun which does not have a tri_lgerlock or trigger guard inplace and in working or...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría