Votos - 1, Puntuación media: 4
(
)
)
|
Resumen del manual
Caution: For soft woods, increase the distance from the cleaning surface. Cars, Boats, & Motorcycles: Wet down area to be cleaned before applying detergent with clean water. Fill the detergent applicator bottle and apply to the area being cleaned. To achieve best results, clean one side at a time. Allow the detergent to rest on the surface for a few minutes but do not let it dry. Rinse at high pressure using the fan jet in a sweeping motion keeping the tip of the spray nozzle at least 8-10 inches away from the surface. distance when using a direct spray. Wipe surface for finish. 8 OPERATING INSTRUCTIONS Unpacking Your Pressure Washer 4 Using the Regulating Lance The angle of the water on the regulating lance may be adjusted for high or low pressure by turning the nozzle adjuster counter-clockwise for a higher pressure or clockwise all the way to the “dot” for a lower pressure. (Fig. 13) Always make sure that the "On/Off' switch is in the "Off" position before changing the pressure of the water jet. It is also recommended that the trigger gun safety lock be engaged as well. The regulating lance allows you to use any variety of pressure from full pressure to low. When using the pressure washer to clean wood decks, siding, vehicles, etc., always begin spraying from a minimum 36- inches away at the lowest pressure setting to avoid damaging the surface material that you are cleaning. Always clear the area that you will be cleaning of people, pets and objects. Using the Turbo Lance The turbo lance is capable of cleaning most areas around the garden or on building work but using detergent is useful when cleaning automobiles or other painted finishes. Using Brush With the Trigger Gun The brush is used with the trigger gun. Push the brush onto the trigger gun nozzle and turn clockwise to lock as you would for the lances. (Fig. 14) the brush may be used for washing cars, boats, windows and other similar items. The brush operates at open orifice pressure so it will not direct a stream of water. 7 OPERATING INSTRUCTIONS Fig. 16Dot indicating lowest pressureFig. 15Using Detergent with the Pressure WasherWe recommend using either brush or the regulating lance when you wish to use the detergent with your pressure washer. To use the regulating lance, set the pressure handle to the minimum pressure level indicated by the “dot”. (Fig. 16)Add detergent to the detergent tank and insert the feed tube into the detergent tank through the removable detergent tank lid. Make sure that the feed tube goes all the way to the bottom of the detergent tank. If you do not need to use detergent, remove the feed tube from the detergent tank. Fig. 13Counter- clockwiseClockwise This high pressure washer is suitable for non-professional use. The working temperature must range between 40°F and 120 °F. The machine is supplied with a trigger gun, equipped with a trigger handle to offer a comfortable working position. The high pressure washer is suitable for washing with cold water only. The water that you use for the pressure washer must not be dirty, sandy or contain any corrosive chemical products. The pressure washer may be used to wash shutters, doors, tiles, cars, decks, campers, etc., where high water pressure is necessary to remove dirt. With the detergent tank, the pressure washer can be used to apply a thick coating of aerated detergent to the areas being cleaned . When using the pressure washer we recommend the use of personal safety items to reduce the risk of accidental injury. After you open the package, check to make sure that all the parts are in the box as per parts that are illustrated on page 3 of this guide. Due to transport and packing restraints, some accessories may be supplied unassembled; in this case follow the assembly instructions in this manual. If you have any questions, call FANTOM customer service at 1 (800) 275-9251. Keep all small and potentially harmful parts of the packaging (plastic bags, foamed polystyrene, nails, etc.) out of the reach of children. Suitable Use of Your Pressure Washer• Place the pressure washer in a safe area and on a horizontal surface. • When using the pressure washer, hold the trigger gun firmly with one hand on the handle and the other on the lance. (Fig. 1) Correct Use of the Pressure WasherFig. 1• NEVER point the water jet at electric wiring, at the pump unit, or at any person or animal. Fig. 14Using the Rotary BrushThe rotary brush is used with the trigger gun. Push the brush onto the trigger gun nozzle and turn clockwise to lock as you would for the lances. ( Fig. 15) The brush may be used for washing cars, boats, windows and other similar items. The rotary brush operates at open orifice pressure so that it will not direct a stream of water. (Fig. 15) CAUTIONSafetyLockWhen you wish to stop using the pressure washer temporarily, make sure that the safety lock has been engaged to avoid any accidental operation. (Fig. 12) Fig. 12 1. Carefully take all the parts out of the packaging contai...