|
Resumen del manual
Warnings • Do not use any solvents or cleaning materials when cleaning the video Monitor. • Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. • Before putting on headphones always adjust the volume setting to the lowest position. • Do not put pressure on the screen. • Caution children to avoid touching or scratching the screen, as it may become dirty or damaged. Table of Contents A.Introduction....................................................................................2 B. Cautions........................................................................................2 C.Contents.......................................................................................3 D.Positioning the Monitor.................................................................3 E.Controls/Indicators/Connectors....................................................4 F. Powering the Unit...........................................................................4 G.Operation .......................................................................................5 H.Using Headphones .....................................................................6 I. Specifications.................................................................................6 Warranty........................................................................................7 1 A. Introduction Thank you for selecting the EX50, 5.0 inch Liquid Crystal Display (LCD) Monitor. It can be used as an additional monitor or used just to replace a lost or damaged monitor. The EX50 utilizes state of the art electronics and is designed for easy portability and is constructed to provide years of reliable, trouble-free service. Please read this manual entirely prior to operation. This manual will assist you in installing the EX50 properly to obtain the best system performance. B. Cautions 1.Use only the adapter supplied with this Monitor. When the system is left unattended and unused for long periods for a long periods of time, unplug it from the power source. Always disconnect the when power source first and then the jack from the system. 2.Ensure that the Monitor is installed in accordance with the instructions and illustrations provided in this manual. 3.To prevent fire or electric shock, do not expose this appliance to rain, moisture or long periods of direct sunlight. Keep the unit away from sources of heat. Do not operate or store the unit close to strong magnetic fields. Do not spill or spray liquid of any kind on or in the system (this may result in a fire or electric shock). 4.To ensure proper ventilation, never cover or block the slots and openings with a cloth or other material. 5.To reduce the risk of electric shock do not remove the back cover of the unit. There are no user-serviceable parts inside. Contact qualified service personnel if your system is in need of repair. 6.When cleaning, make sure the system is unplugged from power source. 2 C. Contents ITEM QTY. 1. 5.0" LCD Monitor VBPEX56 1 2. AC to DC Power Adapter 1 3. DC Power Adapter 1 4. 5.0" LCD Monitor Pouch 1 5. 1/8 to RCA A/V Adapter cable 1 D. Positioning the Monitor Option 1 Vehicle Headrest (Refer to Figure 1) Figure 1 Slide the Monitor into the pouch, feed the bottom piece of the Monitor into the long slot at the bottom of the pouch and attach the Velcro strap to fasten the Monitor in the pouch. Then loop the strap of the pouch around the headrest in the vehicle and pull the end of the strap while holding the buckle until the pouch is tightly secured. Option 2 Flat Surface (Refer to Figure 2) Figure 2 Rotate the base of Monitor backward and place it on a flat surface. Adjust the screen for a proper viewing angle. This can be done with the Monitor inside or outside the pouch. 3 E. Controls/Indicators/Connectors (Refer to Figure 3) Figure 3 1. AV In Jack 2. DC 9V Input Jack 3. Power Off/On Switch 4. Power LED Indicator 5. Brightness Up/Down Control 6. Volume Up/Down Control 7. Headphone Jack # 1 8. Headphone Jack # 2 F. Powering the Unit Option 1 Indoor Power (Refer to Figure 4) Figure 4 Using the AC/DC adapter supplied with the EX50, plug the connector end into the DC 9V IN jack on the side of the Monitor. Plug the AC/DC adapter into a 110V AC power receptable. This can be done with the Monitor inside or outside the pouch. 4 5 Option 2 Vehicle Power (Refer to Figure 5) Figure 5 Using the DC Power adapter supplied, plug the connector end into the DC 9V IN jack on the side of the Monitor. Plug the DC Power adapter into a vehicle power outlet. G. Operation (Refer to Figure 3 & Figure 6) 1. Switch the POWER ON/OFF to On and turn the Monitor on. The POWER LED will light. 2. Using the 1/8 to RCA A/V adapter cable connect the signal output from an auxiliary source such as camcorder,Video Game, DVD Player,Video Cassette Player etc. to the AV IN Jack of the EX50. 3. Use the BRIGHTNESS UP/DOWN control to adjust the...
Otros modelos de este manual:Monitores - EX50 (1.04 mb)