Iniciar sesión:
Votos - 1, Puntuación media: 4 ( )

Manual de usuario Atlantis Land, modelo WIRELESS ROUTER ADSL A02-RA240-W54

Fabricar: Atlantis Land
Tamaño del archivo: 647.6 kb
Nombre del archivo:
Idioma del manual:itenfr
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


2. Double-click LAN Area Connection. 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. 6. Click OK to finish the configuration. Configuring PC (WindowsXP) 1. Go to Start / Control Panel (in Classic View). In the Control Panel, double-click on Network Connections. 2. Double-click Local Area Connection. ENGLISH 3. In the LAN Area Connection Status window, click Properties. 4. Select Internet Protocol (TCP/IP) and click Properties. 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically radio buttons. ENGLISH 6. Click OK to finish the configuration ENGLISH 1.8 Browser configuration ENGLISH 1.8 Browser configuration Open the web browser, enter the local port IP address of this Wireless Router ADSL, which default at 192.168.1.254, and click “Go” to get the login page. The default username is admin, password atlantis and click “OK” to continue. At the configuration homepage, the left navigation pane where bookmarks are provided links you directly to the desired setup page, including: • Status (ADSL, LAN, PPP, VPN connect Status, Learned MAC Table, Routing Table, System Log, Security Log) • Quick Start • Configuration (WAN, LAN, Wireless, System, Firewall, VPN, Virtual Server, Advanced) • Save Config ENGLISH Click on the desired item to expand the page with all settings in the main navigation pane. Following next steps you can make operating Wireless Router ADSL in short time using PCs in DHCP mode. Refer to manual on Installation CD if you need personalized configuration. Click on Quick Start to perform an automatic protocol selection. ENGLISH PPPoE routed/PPPoA routed PPPoA/PPPoE is known as a dial-up DSL or cable service. It is designed to integrate the broadband services into the current widely deployed, easy-to-use, and low-cost dial-up-access networking infrastructure. Therefore, users can get greater access speed without changing the operation concept, sharing the same ISP account and paying for one access account. These are configuration parameters: • Virtual Circuit:Enable ENGLISH • Encapsulation: There are 5 ways :PPPoE VC-Mux, PPPoE LLC, PPPoE None, PPPoA VCMux, and PPPoA LLC. You have to check with your ISP about which way is adopted. • Bridge:Disable • VPI:0 or 1 (Consult the ISP) • VCI:38 or 50 (Consult the ISP) • IP Adress:0.0.0.0 • Subnet Mask:0.0.0.0 • Gateway:0.0.0.0 • Username: Enter the username provided by your ISP(case sensitive). • Password: Enter the password provided by your ISP (case sensitive). • Automatic Reconnect: Check to enable this device to automatically re-establish the PPPoE session when disconnected by ISP. Press Submit and then click on Save Config. Press again Submit. to reboot the Router. To this point approaching the section Status you will be able to check if connection is up, now you can begin navigation. For every other problem refer to manual on attached cd-rom. ENGLISH RFC1483 routed / IpoA routed These are configuration parameters: • Virtual Circuit:Enable • Encapsulation: There are 3 ways :1483 Routed IP LLC, 1483 Routed IP VC-MUX or Classical IP over ATM ( RFC 1577). You have to check with your ISP about which way is adopted. • Bridge:Disable • VPI:0 or 1 (Consult the ISP) ENGLISH • VCI:38 or 50 (Consult the ISP) • IP Adress: Insert your Public IP • Subnet Mask: Insert Netmask provided by ISP • Gateway: Insert router Default Gateway Press Submit and then click on Save Config. Press again Submit. to reboot the Router. To this point approaching the section Status you will be able to check if connection is up, now you can begin navigation. For every other problem refer to manual on attached cd-rom. FRANCAIS Ce guide d’installation rapide vous permet d’installer et de configurer le Wireless Router ADSL suivant des parametres standards. Pour plus de precisions, tant sur les methodes de configuration que sur le parametrage avance, reportez-vous au manuel sous format electronique (PDF) disponible sur le CD Rom fourni. Avant d’installer votr...

Otros modelos de este manual:
Monitores - WIRELESS ROUTER ADSL A02-RA210-W54 (647.6 kb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría