Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
The following data can be saved and loaded as user data files: . All menu settings (including the function settings of the buttons at the front of the monitor) with the exception of USER MODE LOAD/SAVE . Screen values which have been adjusted by the image controls Saving the user data Loading the user data When the MENU/EXIT button is pressed, the main When the MENU/EXIT button is pressed, the main 11 menu appears on the screen. menu appears on the screen. Using menu operations (see page 13), select USER Using menu operations (see page 13), select USER 22 MODE SAVE on the SYSTEM CONFIG screen, and MODE LOAD on the SYSTEM CONFIG screen, and press the FUNCTION/ENTER button. The setting is press the FUNCTION/ENTER button. The setting is now displayed in green. now displayed in green. [SYSTEMCONFIG] BACKLIGHT 60 FUNCTION WFM WFM FUNCTION HDZOOM FRONT PEAKINGPHASE PHASE USERMODELOAD FACTORY USERMODESAVE USER1 EXIT SEL 1 MENU EN XW Displayed in green. [SYSTEMCONFIG] BACKLIGHT 60 FUNCTION WFM WFM FUNCTION HDZOOM FRONT PEAKINGPHASE PHASE USERMODELOAD FACTORY USERMODESAVE USER1 EXIT SEL SET 1 MENU ENTER XW Displayed in green. When the file whose data is to be saved is selected 33 from the USER1 to USER5 files and the FUNCTION/ENTER button is then pressed, the screen shown below appears. [USERMODESAVE] USER1 YES NO EXIT SEL SET 1 MENU ENTER XW 4 Align the cursor with YES, and press the FUNCTION/ENTER button. When the file whose data is to be loaded is selected from the FACTORY or USER1 to USER5 files and the FUNCTION/ENTER button is then pressed, the screen shown below appears. If FACTORY is selected at this time, the data is restored to the factory settings. [USERMODELOAD] USER1 YES NO EXIT SEL SET 1 MENU ENTER XW 4 Align the cursor with YES, and press the FUNCTION/ENTER button. MAIN MENU Menu configuration MARKER GAMMA SELECT SHARPNESS H SHARPNESS V BATTERY REMAIN STATUS DISPLAY CRCC MESSAGE MENU POSITION STATUS POSITION ROTARY POSITION COLOR TEMP. SHARPNESS MODE SD ASPECT I-P MODE MONOINPUT SELECT SDI1 FORMAT SDI2 FORMATMAIN VIDEO CONFIG SYSTEM CONFIGOSD CONFIG GPI CONTROL VIDEO FORMAT YPBPR/RGB MODE FORMAT COMPONENT LEVEL RGB SYNC FILM GAMMA MARKER SELECT MARKER 16:9 MARKER 4:3 MARKER BACK CENTER MARKER GPI PRESET1 GPI PRESET2 BACKLIGHT FUNCTION WFM HD ZOOM PEAKING/PHASE USER MODE LOAD USER MODE SAVE GPI1 GPI2 GPI3 GPI4 GPI5 GPI6 GPI7 GPI8 CONTROL LOCAL ENABLE BACKLIGHT TIME MAIN MENU Menu items MARKER Item Setting Description MARKER SELECT MENU GPI For setting whether the marker display settings are to be performed using the menu or from the GPI connector. MENU: The operations are performed using the menu. Operations from the GPI connector are canceled. GPI: The operations are performed from the GPI connector. The settings established using the menu are canceled. MARKER 16:9 OFF 4:3 13:9 14:9 VISTA CNSCO 95% 93% 90% 88% 80% For selecting the type of marker used for 16:9 images. OFF: No markers are displayed. 4:3: Markers indicating the 4:3 size are displayed. 13:9: Markers indicating the 13:9 size are displayed. 14:9: Markers indicating the 14:9 size are displayed. VISTA: Markers in the vista size (1.85:1) are displayed. CNSCO: Markers in the cinemascope size (2.35:1) are displayed. 95%: The 95% area markers are displayed. 93%: The 93% area markers are displayed. 90%: The 90% area markers are displayed. 88%: The 88% area markers are displayed. 80%: The 80% area markers are displayed.