Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
When viewing a fixed screen for an extended period of time, residual image or blurriness may appear. • Change the mode to energy saving mode or set a screensaver to a changing picture when away from the LCD Display for an extended period of time. Adjusts the resolution and frequency to the level appropriate for the model. • An inappropriate resolution may cause undesirable picture quality. 70 inch (177 cm) - 1920 x 1080 82 inch (207 cm) - 1920 x 1080 Viewing the LCD Display continuously at a too close angle may result in damage to your eyesight. To ease eye strain, take at least a five-minute break after every hour of using the LCD Display. Do not install the product on an unstable, uneven surface or a location prone to vibrations. • Dropping the product may cause damage to the product or the person carrying it. Using the product in a location prone to vibrations may shorten the lifetime of the product or may cause the product to catch fire. When moving the LCD Display , turn off and unplug the power cord. Make sure that all cables, including the antenna cable and cables connected to other devices, are disconnected before moving the LCD Display. • Failure to disconnect cables may damage it and cause fire or electric shock. Make sure there are more than two people when moving the product. • Dropping the product may cause a malfunction or injury to the person carrying it. Place the product out of children’s reach, as they could damage by hanging onto it. • A falling product may cause injury to the person or even fatality. When not using the product for an extended period of time, keep the product unplugged. • Otherwise, this may cause heat emission from the accumulated dirt or degraded insulation, causing electric shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. • Children may try to climb on the product to retrieve an object. The product could fall, causing injury or even fatality. When removing batteries from the remote control, be careful that they are not swallowed by children. keep the batteries out of children's reach. • If the batteries are swallowed, see a doctor immediately. When replacing batteries, place the batteries in the correct +/- polarity position as indicated on the battery holder. • The incorrect polarity may cause a battery to break or leak and may cause fire, injury, or contamination (damage). Use only specified standard batteries. Do not use new and used batteries together. • This may cause a battery to break or leak and may cause fire, injury, or contamination (damage). The batteries (and rechargeable batteries) is not ordinary refuse and must be returned for recycling purposes. The customer is responsible for returning the used or rechargeable batteries for recycling purposes as the consumer. • The customer can return used or rechargeable batteries to a nearby public recycling center or to a store selling the same type of the battery or rechargeable battery. Power Installation Guide • Make sure to read and follow the instructions carefully and correctly. Failing to do so, may result in death, serious personal injury or fire. Power Installation Guide • Before installing the product, make sure to check the power requirements for the installation location. If you want to install the product in a power environment (power cable, power outlet, circuit breaker, etc.) with a current/power capacity lower than the current product consumption/power consumption, install a separate power transformer according to the 'Rated Capacities' table. The consumer should pay the expenses for this. • Make sure to connect the product to a dedicated power outlet and do not connect it to a multi-plug extension cord. If you have to use a multi-plug extension cord, refer to the current consumption in the 'Rated Capacities' table and use a multi-plug with the permitted current specifications greater than the total current consumption of the products connected to it. • When using a dedicated power extension cable, use a high-capacity power cable. Use a power cable with a permitted current of 12.5 A or more. Rated Current of the Power Plug /Cord/Appliance Coupler • Use a power cable with 12.5 A or more. Note • Refer to the Cable Safety Specifications. • UL specifications - Use a cable with 14 AWG or more • KS specification - Use a cable with 20.SQ or more • IEC specification - Use a cable with 2.5 SQ or more Rated Capacities (Power consumption measurements based on 82") Input Voltage / Current Consumption Power Consumption Output Power (W) Frequency (A) (W) 12.75 (Max. Audio output 100 V / 50 Hz 9.649 971 power) 12.75 (Max. Audio output 240 V / 50 Hz 3.864 918 power) 12.75 (Max. Audio output 100 V / 60 Hz 9.659 970 power) 12.75 (Max. Audio output 240 V / 60 Hz 3.891 919 power) 1.59 (1/8 W max. output 90 V / 50 Hz 10.447 945 power) 1.59 (1/8 W max. output 100 V / 50 Hz 9.260 933 power) 1.59 (1/8 W max. output 240 V / 50 Hz 3.766 898 power) 1.59 (1/8 W max. out...
Otros modelos de este manual:Monitores - 820TSN (3.74 mb)