Votos - 4, Puntuación media: 3.5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Command type Command Value range 1 Power control 0x11 0~1 2 Volume control 0x12 0~100 3 Input source control 0x14 - 4 Screen mode control 0x18 - 5 Screen size control 0x19 0~255 6 PIP on/off control 0x3C 0~1 7 Auto adjustment control 0x3D 0 8 Video wall mode control 0x5C 0~1 9 Safety Lock 0x5D 0~1 • Issued IDs can be displayed in hexadecimals. However, ID 0 must be displayed as 0xFF. • All communications take place in hexadecimals. The checksum is calculated by adding up all values except the header. If a checksum adds up to be more than 2 digits as shown below (11+FF+01+01=112), the first digit is removed. E.g. Power On & ID=0 Header Command ID Data length Data 1 Checksum 0xAA 0x11 1 "Power" Header Command ID Data length Data 1 12 0xAA 0x11 1 1 411 Preparations 1 1 Preparations • To control all devices connected by a serial cable simultaneously irrespective of IDs, set the ID as "0xFE" and transmit commands. Commands will be executed by each device but ACK will not respond. Power control • Function A product can be powered on and off using a PC. • Viewing power state (Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "Power" "Power": Power code to be set on a product. 1 : Power ON 0 : Power OFF • Ack Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF 3 ‘A’ 0x11 "Power" "Power": Power code to be set on a product. • Nak Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF 3 ‘N’ 0x11 "ERR" "ERR" : A code showing what error has occurred. 421 Preparations 1 1 Preparations Volume control • Function The volume of a product can be adjusted using a PC. • Viewing volume state (Get Volume Status) Header Command ID Data length Checksum 0xAA 0x12 0 • Setting the volume (Set Volume) Header Command ID Data length Data Checksum 0xAA 0x12 1 "Volume" "Volume": Volume value code to be set on a product. (0-100) • Ack Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF 3 ‘A’ 0x12 "Volume " "Volume": Volume value code to be set on a product. (0-100) • Nak Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF 3 ‘N’ 0x12 "ERR" "ERR" : A code showing what error has occurred. 431 Preparations 1 1 Preparations Input source control • Function The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command Data length Data Checksum 0xAA 0x14 ID 1 "Input Source" "Input Source": An input source code to be set on a product. 0x14 PC 0x1E BNC 0x18 DVI 0x0C Input source 0x04 S-video 0x08 Component 0x20 MagicInfo 0x1F DVI_video 0x30 RF (TV) 0x40 DTV 0x21 HDMI1 0x22 HDMI1_PC 0x23 HDMI2 0x24 HDMI2_PC 0x25 Display Port . DVI_video, HDMI1_PC and HDMI2_PC cannot be used with the Set command. They only respond to "Get" commands. . This model does not support BNC, S-Video, HDMI2 and HDMI2_PC, DisplayPort. . MagicInfo is only available with models that contain the MagicInfo function. . RF (TV) and DTV are only available with models that include a TV. 441 Preparations 1 1 Preparations • Ack Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksu m 0xAA 0xFF 3 ‘A’ 0x14 "Input Source" "Input Source": An input source code to be set on a product. • Nak Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksu m 0xAA 0xFF 3 ‘N’ 0x14 "ERR" "ERR" : A code showing what error has occurred. 451 Preparations 1 1 Preparations Screen • Function The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the Video Wall function is enabled. This control can only be used on models that include a TV. • Viewing screen status (Get Screen Mode Status) Header Command ID Data length Checksum 0xAA 0x18 0 • Setting the picture size (Set Picture Size) Header Command Data length Data Checksum 0xAA 0x18 ID 1 "Screen Mode" "Screen Mode": A code that sets the product status. 0x01 16 : 9 0x04 Zoom 0x31 Wide Zoom 0x0B 4 : 3 • Ack Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksu m 0xAA 0xFF 3 ‘A’ 0x18 "Screen Mode" "Screen Mode": A code that sets the product status. • Nak Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksu m 0xAA 0xFF 3 ‘N’ 0x18 "ERR" "ERR" : A code showing what error has occurred. 461 Preparations 1 1 Preparations Screen size control • Function The screen size of a product can be changed using a PC. • Viewing the screen size (Get Screen Size Status) Header Command ID Data length Checksum 0xAA 0x19 0 • Ack Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksu m 0xAA 0xFF 3 ‘A’ 0x19 "Screen Size" "Screen Size": Product screen size (range: 0 – 255, unit: inch) • Nak Header Comma nd ID Data length Ack/Nak r-CMD Val1 Checksu m 0xAA 0xFF 3 ‘N’ 0x19 "ERR" "ERR" : A code showing what error has occurred. 471 Preparations 1 1 Preparations PIP On/Off control • Function The ...
Otros modelos de este manual:Monitores - MD32B (10.09 mb)
Monitores - MD46B (10.09 mb)
Monitores - MD55B (10.09 mb)