Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
To avoid electric shock, never touch the inside of the LCD Monitor. Only a qualified technician should open the case of the LCD Monitor. Never use your LCD Monitor if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away from areas where people can trip over it. Be sure to hold the plug, not the cord, when disconnecting the LCD Monitor from an 6 6 electric socket. Openings in the LCD Monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Also, avoid using the LCD Monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the 7 7 bottom of the cabinet. If you put the LCD Monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation. Put your LCD Monitor in a location with low humidity and a minimum of dust Do not expose the LCD Monitor to rain or use it near water (in kitchens, near swimming 8 8 pools, etc.). If the LCD Monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the LCD Monitor with a damp cloth when necessary, but be sure to unplug the LCD Monitor first. Place the LCD Monitor on a solid surface and treat it carefully. The screen is made of thin 9 9 glass with a plastic front surface and can be damaged if dropped, hit or scratched. Do not clean the front panel with keton-type materials (e.g., acetone), ethyl alcohol, toluene, ethyl acid, methyl, or chloride – these may damage the panel. 10 10 Locate your LCD Monitor near an easily accessible AC outlet. 13 13 12 12 11 11 If your LCD Monitor does not operate normally – in particular, if there are any unusual sounds or smells coming from it – unplug it immediately and contact an authorized dealer or service center. High temperature can cause problems. Don’t use your LCD Monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat. Unplug the LCD Monitor when it is going to be left unused for an extended period of time. 14 14 Unplug your LCD Monitor from the AC outlet before any service. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. English 2 English 3 Italiano Portuguese Deutsch Espanol Francais English Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. AUTO EXIT MENU A B Manual Colorific & Driver DC-Adapter DVI-D Signal Cable (Optional) Power Cord Monitor and Base 15-pin D-Sub Signal Cable Warranty Card (not available everywhere) Unpacking Your LCD Monitor English 4 Setting up an Ergonomic Workstation Consider the advice given below before you install your monitor. Monitor location Choose a position that exposes you monitor to the least reflection from lights or windows, usually at a right angle to any window. Workstation height Place your LCD Monitor so that the top of the screen is slightly below your eye level when you are comfortably seated. Viewing angle Tilt the screen backward or forward to a comfortable viewing position. Figure 1. Tilt the screen Kensington Security Slot This monitor offers you the opportunity to secure your monitor using a Kensington-type security device. Kensington lock not included. Refer to your locking device documentation for installation instructions. Figure 2. Kensington-type security slot location MENU AUTO Setting up your LCD Monitor English 5 Italiano Portuguese Deutsch Espanol Francais English Connecting Your LCD Monitor This monitor offers a method for connection to both a PC and a workstation. One or both types of signal cables can be connected to the monitor simultaneously. Determine which connection method(s) you need and refer to the instructions below. Figure 3. Cable connections (Analog) 1 Turn off your system and unplug its power cord. 2 Attach the blue signal cable connector to the video port on the back of your computer. 3 Connect the power cord for your monitor to the power port on the power adapter. 4 Plug the power cords of your computer and your monitor into a nearby outlet . 5 Turn on your computer and monitor. If your monitor displays an image, installation is complete. 6 Perform the auto adjustment procedure as described in “Auto Adjustment” on page 7. 2 3 4 Setting up your LCD Monitor English 6 Figure 4. Cable connections (Digital) 1 Turn off your computer and unplug its power cord. 2 Connect the signal cable to the DVI-D connector (1) on the back of your monitor. Connect the other end of the cable to the video port on the back of your workstation. 3 Connect the power cord for your monitor to the power port on the power adapter. 4 Secure the power adapter cord and the signal cable(s) under the metal prong. 5 Insert the tab on each side of the hinge cover (b) then attach the stand of the monitor. 6 Plug the ...