Votos - 1, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). (Available in Analog mode only) MENU > , > > , > > , > MENU Sharpness Changes the clearance of image. 41 Adjusting the Monitor ( Not available in MagicColor mode of Full and Intelligent. ) MENU > , > > , > > , > MENU H-Position Changes the horizontal position of the monitor's entire display. (Available in Analog mode only) MENU > , > > , > > , > MENU V-Position 42 Adjusting the Monitor Changes the vertical position of the monitor's entire display. (Available in Analog mode only) MENU > , > > , > > , > MENU OSD Language You can choose one of nine languages. Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. MENU > , > > > , > MENU 43 Adjusting the Monitor H-Position You can change the horizontal position where the OSD menu appears on your monitor. MENU > , > > , > > , > MENU V-Position You can change the vertical position where the OSD menu appears on your monitor. MENU > , > > , > > , > MENU 44 Adjusting the Monitor Transparency Change the transparency of the background of the OSD. • Off • On MENU > , > > , > > , > MENU Display Time The menu will be automatically turned off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. 45 Adjusting the Monitor • 5 sec • 10 sec • 20 sec • 200 sec MENU > , > > , > > , > MENU Setup Reset Reverts the product settings to factory defaults. • No • Yes MENU > , > > , >> MENU 46 Adjusting the Monitor Customized Key You can specify a function which will be activated when the Customized Key ( )is pressed. MENU > , > > , >> , >MENU Off Timer The monitors will turn off automatically at the specified time. • Off • On 47 Adjusting the Monitor MENU > , > > , >> , > > , > MENU Auto Source Select Auto Source for the monitor to automatically select the signal source. • Auto • Manual MENU > , > > > , > MENU Image Size You can change the size of the screen displayed on your monitor. 48 Adjusting the Monitor • Auto • Wide • Auto - The screen is displayed in accordance with the screen aspect ratio of the input signals. • Wide - A full screen is displayed regardless of the screen aspect ratio of the input signals. Note • Signals not available in the standard mode table are not supported. • If the wide screen which is the optimal resolution for the monitor is set on your PC, this function is not performed. MENU > , > > , >> , > MENU Information Shows a video source, display mode on the OSD screen. MENU > , >MENU 49 Troubleshooting Self-Test Feature Check Note Your monitor provides a self test feature that allows you to check whether your monitor is functioning properly. Self-Test Feature Check 1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. 3. Turn on the monitor. If the monitor is functioning properly, you will see a box in the illustration below. This box appears during normal operation if the video cable becomes disconnected or damaged. 4. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor. If your monitor screen remains blank after using the previous procedure, check your video controller and computer system; your monitor is functioning properly. Warning Messages If there is something wrong with the input signal, a message appears on the screen or the screen goes blank although the power indicator LED is still on. The message may indicate that the monitor is out of scan range or that you need to check the signal cable. Environment The location and the position of the monitor may influence the quality and other features of the monitor. If there are any sub woofer speakers near the monitor, unplug and relocate the woofer to another room. Remove all electronic devices such as radios, fans, clocks and telephones that are within 3 feet (one meter) of the monitor. Useful Tips A monitor recreates visual signals received from the computer. Therefore, if there is a problem with the computer or the video card, this can cause the monitor to become blank, have poor coloring, become 53 Troubleshooting noisy, and video mode not supported, etc. In this case, first check the source of the problem, and then contact the Service Center or your dealer. Judging the monitor's working condition If there is no image on the screen or a "Not Optimum Mode", "Recommended Mode 1680 x 1050 60 Hz" message comes up, disconnect the cable from the computer while the monitor is still powered on. If there is a message coming up on the screen or if the screen goes white, this means the monitor is in working condition. In this case, check the computer for trouble. Check List Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section o...
Otros modelos de este manual:Monitores - 2043BW (4.22 mb)
Monitores - 2243BW (4.22 mb)
Monitores - 2243BWT (4.22 mb)
Monitores - 2243BWX (4.22 mb)