Votos - 1, Puntuación media: 5
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Do not use adaptor by the waterside or outside particularly when it rains or snows. Be careful that adaptor should not be wet while cleaning floor with water. Avoid using a humidifier or cooker near the product. • Otherwise, it may result in electric shock or fire. Since the display panel is hot after using it for a long time, do not touch the product. Take care when adjusting the angle of the product or the height of the stand. • If your hand or finger is caught, you may be injured. • If the product is tilted excessively, the product may fall and this may result in injury. Watching the product from too close a distance continuously may damage your eyesight. It is important to give your eyes some rest (5 minutes every hour) when viewing the product screen for long periods of time. • This will alleviate any eye strain. Keep small accessories away from the children. Avoid placing a heavy object over the product. • Otherwise, it may result in a problem with the product or injury. Maintaining the Correct Posture when Using this Product Maintain the correct posture when using this product. • Straighten your back. • Keep a distance of 45~50 cm from your eyes to the screen. Look down at the screen and face the screen forwards. • Adjust the angle of the product so that light is not reflected onto the screen. • Keep your elbow at a right angle and keep your arm level with the back of your hand. • Keep your elbow at a right angle. • Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart. Major Safety Precautions 1-3 2 Installing the Product 2-1 Package Contents 0 • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product at a later stage. Monitor Contents ^7 V teo Installation Manual Product Warranty (Not available in all locations) User Manual D-Sub Cable Power Cord DC-Adapter Stand OPTIONAL PARTS Vo HDMI Cable DVI Cable HDMI to DVI Cable Cleaning Cloth E3 The cleaning cloth is supplied with black high-glossy models only. 2-1 Installing the Product 2-2 Installing the Stand E3 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. Put the stand on a plane table. Hold the main body of the product with your hand as shown by the figure. Push the main body of the product into the stand in the direction of the arrow as shown in the figure. - Caution Avoid lifting the product holding only the stand. ES Disassembly is in the reverse order of the assembly. Installing the Product 2-2 2-3 Connecting with a PC E3 The connecting part may differ depending on the product model. 1. Connect the product to a PC depending on the video output supported by the PC. • When the graphics card provides D-Sub (
Monitores - BX1950 (1.5 mb)
Monitores - BX2050 (1.5 mb)
Monitores - BX2050N (1.5 mb)
Monitores - BX2250 (1.5 mb)