Votos - 5, Puntuación media: 3.6
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
If the results are unsatisfactory, decrease the bars or stripes are vertical bars or stripes using the CLOCK icon in the on screen display. visible. • Press the AUTO/SET button to automatically appearing in any Any horizontal noise adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the image or characters horizontal bars using the PHASE icon in the on portrayed. are not clearly screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). • Check if the signal cable is properly connected The screen color is and use a screwdriver to fasten if necessary. mono or abnormal. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. The screen blinks. • Make sure the power voltage is high enough, It has to be higher than AC100-240V 50/60Hz. A17 Troubleshooting Have you installed the display driver? Have you installed the • Be sure to install the display driver from the display display driver? driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: Do you see an • Make sure to check if the video card supports "Unrecognized monitor, Plug&Play function. Plug&Play (VESA DDC) monitor found" message? A18 Specifications Display Display 17 inch 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 17 inches viewable 0.264 mm pixel pitch Sync Input Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, SOG (Sync On Green) Video Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max VESA 1280 x 1024 @75 Hz Recommend VESA 1280 x 1024 @60 Hz Plug&Play DDC 2B Power Consumption Dimensions &Weight Tilt Range 0n Mode : 30 W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Without Stand Width 36.45 cm / 14.35 inches 36.45 cm / 14.35 inches Height 37.82 cm / 14.89 inches 30.50 cm / 12.08 inches Depth 18.00 cm / 7.08 inches 5.80 cm / 2.28 inches Net 3.3 kg (7.28 lbs) Tilt -5.~20. Power Input AC 100-240V~ 50/60Hz 0.8A Environmental Operating ConditionsConditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Stand Base Attached( ), Detached ( O ) Power cord Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without notice. A19 Specifications 19 inch Display 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.294 mm pixel pitch Sync Input Horizontal Freq. 30 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, SOG (Sync On Green) Video Input Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Resolution Max VESA 1280 x 1024 @75 Hz Recommend VESA 1280 x 1024 @60 Hz Plug&Play DDC 2B Power Consumption 0n Mode : 33 W(Typ.) Sleep Mode . 1 W Off Mode . 1 W Dimensions With Stand Without Stand &Weight Width 40.20 cm / 15.83 inches 40.20 cm / 15.83 inches Height 40.75 cm / 16.04 inches 33.30 cm / 13.11 inches Depth 18.00 cm / 7.08 inches 5.80 cm / 2.28 inches Net 4.2 kg (9.26 lbs) Tilt Range Tilt -5.~20. Power Input Environmental Conditions Stand Base AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Power cord Wall-outlet type or PC-outlet type NOTE Information in this document is subject to change without notice. A20 Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 VGA 640 x 350 31.469 70 2 VGA 720 x 400 31.468 70 3 VGA 640 x 480 31.469 60 4 VESA 640 x 480 37.500 75 5 VESA 800 x 600 37.879 60 6 VESA 800 x 600 46.875 75 7 MAC 832 x 624 49.725 75 8 VESA 1024 x 768 48.363 60 9 VESA 1024 x 768 60.023 75 10 MAC 1152 x 870 68.681 75 11 VESA 1152 x 900 61.805 65 *12 VESA 1280 x 1024 63.981 60 13 VESA 1280 x 1024 79.976 75 * Recommend Mode Indicator LED ColorMODE On Mode Blue Sleep Mode Amber Off Mode Off A21 Installing the Wall mount plate This monitor satisfies the specifications of the Wall mount plate or the interchange device. 1. Put a cushion or soft cloth on a flat surface. 2. Place the monitor face down on the cushion or soft cloth. The Head part The Stand base part 3. Hold the product as it follows and lift up the Stand slightly. 4. Change your hold on the product as it follows and turn the Stand Base in the arrow direction until you hear a "click." 5. Pull out the Stand to remove. A22 Installing the Wall mount pl...
Otros modelos de este manual:Monitores - L1753S-SF.AEKVQVN (3.26 mb)
Monitores - L1953S-BF (3.26 mb)
Monitores - L1953S-SF (3.26 mb)