Votos - 5, Puntuación media: 3.6
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
• Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. • Press the SET/AUTO button to automatically background, vertical On the screen adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the bars or stripes are vertical bars or stripes using the CLOCK icon in the on screen display. visible. • Press the SET/AUTO button to automatically appearing in any Any horizontal noise adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the image or characters horizontal bars using the PHASE icon in the on portrayed. are not clearly screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). • Check if the signal cable is properly connected The screen color is and use a screwdriver to fasten if necessary. mono or abnormal. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. The screen blinks. A15 Troubleshooting Have you installed the display driver? Have you installed the • Be sure to install the display driver from the display display driver? driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: Do you see an • Make sure to check if the video card supports "Unrecognized monitor, Plug&Play function. Plug&Play (VESA DDC) monitor found" message? A16 A17 Specifications 17 inch Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input AC-DC Adapter Environmental Conditions Stand Base Power cord NOTE Information in this document is subject to change without notice. 17 inches (43.2 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 43.2 cm 0.264 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form SOG (Sync On Green), Digital Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B On Mode : 30 W(Typ.) Sleep Mode : 1 W(Typ.) Off Mode . 1 W Width x Height x Depth [1] 39.21cm(15.44inches) x 39.10cm(15.39inches) x 22.60cm(8.90inches) [2] 39.21cm(15.44inches) x 44.19cm(17.40inches) x 9.62cm(3.78inches) Net 3.7 kg (8.16 lbs) Tilt -5°~20° 12V 3.0A DVE, DSA-0421S-12 1 42 or Lien Chang, LCAP07F Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type SOURCESOURCE MENUMENU SET/AUTO EngineEngine (Width) (Depth) (Height) SOURCE MENUMENU SET/AUTOSET/AUTO EngineEngine (Width) (Depth) (Height) Separate Sync, Positive / Negative A18 Specifications 19 inch NOTE Information in this document is subject to change without notice. Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions &Weight Tilt Range Power Input AC-DC Adapter Environmental Conditions Stand Base Power cord 19 inches (48.19 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating Visible diagonal size : 48.19 cm 0.294 mm pixel pitch Horizontal Freq. Analog : 30 - 83 kHz (Automatic) Digital : 30 - 71 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form SOG (Sync On Green), Digital Signal Input 15 pin D-Sub Connector DVI - D connector (Digital) Input Form RGB Analog (0.7 Vp-p/ 75 ohm), Digital Max Analog : VESA 1280 x 1024 @75 Hz Digital : VESA 1280 x 1024 @60 Hz Recommend VESA 1280 x 1024 @60 Hz DDC 2B On Mode : 35 W(Typ.) Sleep Mode : 1 W(Typ.) Off Mode . 1 W Width x Height x Depth [1] 42.99cm(16.93inches) x 42.61cm(16.78inches) x 22.60cm(8.90inches) [2] 42.99cm(16.93inches) x 47.86cm(18.84inches) x 9.71cm(3.82inches) Net 4.6 kg (10.14 lbs) Tilt -5°~20° 12V 3.0A DVE, DSA-0421S-12 1 42 or Lien Chang, LCAP07F Operating Conditions Temperature 10°C to 35 °C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20°C to 60 °C Humidity 5 % to 90 % non-Condensing Attached( ), Detached ( O ) Wall-outlet type or PC-outlet type SOURCE MENUMENU SET/AUTO EngineEngine (Width) (Depth) (Height) SOURCESOURCE MENUMENU SET/AUTO Engine (Width) (Depth) (Height) Separate Sync, Positive / Negative Specifications Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) 1 VGA 640 x 350 31.469 70 2 VGA 720 x 400 31.468 70 3 VGA 640 x 480 31.469 60 4 VESA 640 x 480 37.500 75 5 VESA 800 x 600 ...
Otros modelos de este manual:Monitores - L1760TR-BF.AEUOQPN (838.81 kb)
Monitores - L1760TR-BFQ (838.81 kb)
Monitores - L1960TR-BF (838.81 kb)