Votos - 5, Puntuación media: 3.8
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Spectacle When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally, in a nonlinear proportion, to fill the entire screen. Full When your AV receives the wide screen signal, it will lead you to adjust the picture horizontally or vertically, in a linear proportion, to fill the entire screen fully. (Europe version only) When your AV receives the wide screen signal, it will be automatically changed to picture format to be sent. Original 4:3 This pIcture format is 4 to 3 of general AV. 16:9 You can enjoy the cinema (the picture format of 16:9) or general TV programme thorough the 16:9 mode. The screen 16:9 is viewed just like that but the screen 4:3 is magnified to the left and right so that the screen 16:9 is full. 1:1 This pIcture format is 1 to 1 of general AV. (only RGB PC, HDMI/DVI PC) You can enjoy the picture format of 14:9 or general AV programme through the 14:9 mode. The screen 14:9 is viewed just like that the screen 4:3 is magnified to the upper/lower and left/right. 14:9 You can enjoy the cinema in a vast screen through the Zoom mode. The screen 4:3 is magnified to the upper/lower and left/right sides so that screen 16:9 is full. The bottom and top of the picture may be lost. Zoom1, 2 MODE ARC AV Component HDMI/DVI RGB DTV PC DTV PC Spectacle Full Original 4:3 16:9 14:9 Zoom1 Zoom2 1:1 Use this function to reset the product to the factory default.(Manual config. manu only) Reset 32 Troubleshooting 33 • See if the power cord is properly connected to the outlet. • See if the power switch is turned on. • Adjust brightness and contrast again. • If the product is in power saving mode, move the mouse or press any key. • The signal from the PC (video card) is out of the vertical or horizontal frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual. * Maximum resolution - 32 / 37 / 42 inch model RGB : 1600 x 1200 @60Hz HDMI/DVI : 1280 x 1024 @60Hz • The signal cable between PC and product is not connected. Check the signal cable. • Press the 'INPUT' menu in the remote Control to check the input signal. No image is displayed • The control locking function prevents unintentional OSD setting change due to careless usage. To unlock the controls, simultaneously press the Menu button and button for several seconds. (You cannot set this function using the remote control buttons. You can set this function in the product only.) The 'Controls Locked' message appears when pressing the Menu button. 'Controls Locked' message appears. • Install the product driver, which is provided with the product, or download it from the web site. (• See if the plug&play function is supported by referring to the video card user manual. Did you install the driver? 'Unknown Product' message appears when the product is connected. Note * Vertical frequency: To enable the user to watch the product display, screen image should be changed tens of times every second like a fluorescent lamp. The vertical frequency or refresh rate is the times of image display per second. The unit is Hz. * Horizontal frequency: The horizontal interval is the time to display one vertical line. When 1 is divided by the horizontal interval, the number of horizontal lines displayed every second can be tabulated as the horizontal frequency. The unit is kHz. Is the product power cord connected? Is the power indicator light on? Power is on, power indicator is green but the screen appears extremely dark. the power indicator amber? Does the 'Out of range' message appear? Does the 'Check signal cable' message appear? Troubleshooting Is the screen position wrong? Do thin lines appear on the background screen? Horizontal noise appears or the characters look blurred. The screen is displayed abnormally. The screen image looks abnormal. • D-Sub analog signal – Press the “AUTO” button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. • See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel – Display – Setting menu. • D-Sub analog signal – Press the “AUTO” button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. • D-Sub analog signal – Press the “AUTO” button in the remote control to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. • The proper input signal is not connected to the signal port. Connect the signal cable that matches with the source input signal. • If you use a fixed image for a long time, the pixels may be damaged quickly. Use the screen-saver function. After-image appears when the product is turned off. After-image ...
Otros modelos de este manual:Monitores - M3201C-BA (4.19 mb)
Monitores - M3201C-BAF (4.19 mb)
Monitores - M3201C-SA (4.19 mb)
Monitores - M3701C (4.19 mb)