Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
NOTE If this does not improve the screen image, restore the factory default settings. If necessary, execute the WHITE BALANCE function again. This function will be enabled only when the input signal is an analog signal. 19 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. 20 Sub- menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name Icons Button TipExit Move Select another sub-menu Press the MODE Button, then the main menu of the OSD appears. On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Main menu Sub menu Description NORMAL Select this when you want to use the product in the most general using environment. MOVIE Select this when you are watching a video or movie. INTERNET Select this when you are working on the document (Word etc.) DEMO This is used for advertising in the store. The screen will be divided to show the standard mode on the left and video mode on the right so that the consumers can check the difference after applying the video mode. Exit : Exit , : Move : Select another sub-menu 21 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description Main menu Sub menu Description WIDE Switch to full screen mode according to input image signal. ORIGINAL Exit : Exit , : Move : Select another sub-menu Change the input image signal ratio to original. * This function works only if input resolution is lower than monitor ratio (16:9). 22 Troubleshooting Check the following before calling for service. 23 No image appears Do you see a "OSD LOCKED" message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. Do you see “OSD LOCKED” when you push MENU button? 24 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars...
Otros modelos de este manual:Monitores - 4063773 (1.47 mb)
Monitores - 9262894 (1.47 mb)
Monitores - W1946S (1.47 mb)
Monitores - W1946S-BF (1.47 mb)