Votos - 3, Puntuación media: 4.7
(
)
)
|
Resumen del manual
HDMI input,use this button to enter 4:3 IN WIDE, PHOTO EFFECT,VOLUME items. For more information,refer to page A17 -A18 . © MENU Button Use this button to enter or exit from the On Screen Display. OSD LOCKED/UNLOCKED This function allows you to lock the current control settings, so that these settings are not inadvertently changed. To lock the OSD settings, press and hold the MENU button for several seconds. The message "OSD LOCKED" appears. You can unlock the OSD settings at any time by pushing the MENU button for several seconds. The message "OSD UNLOCKED" appears. Control Panel Functions Control Function o Buttons Use these buttons to select or adjust functions in the On Screen Display. ▼ Button (^•ENGINE ) For more information, refer to page A19 -A20. k Button (SOURCE) Use this button to make either D-Sub,DVI or HDMI connector active. This feature is used when two computers are connected to the display. The default setting is D-Sub. © AUTO/SET Button Use this button to select an icon in the On Screen Display. AUTO IMAGE ADJUSTMENT When adjusting your display settings, always press the AUTO/SET button prior to entering the On Screen Display(OSD). This will automatically adjust your display image to the ideal settings for the current screen resolution size (display mode). The best display mode is: W2753VC : 1920 x 1080 © Power Button Use this button to turn the display on or off. Power Indicator This Indicator lights up as red when the display is operating normally(On Mode). If the display is in Sleep Mode (Energy Saving), this indicator color changes to flicker. © Light Sensor This is lens for light sensor sletect outside luminance, when setting AUTO BRIGHT ON. On Screen Display (OSD) Control Adjustment Screen Adjustment Making adjustments to the image size, position and operating parameters of the display is quick and easy with the On Screen Display Control system. A short example is given below to familiarize you with the use of the controls. The following section is an outline of the available adjustments and selections you can make using the OSD. NOTE ■ Allow the display to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: MENU — T A— AUTO/SET — ▼ A — MENU cj] Press the MENU Button, then the main menu of the OSD appears. ^ To access a control, use the ▲ or ▼ Buttons. When the icon you want becomes highlighted, press the AUTO/SET Button. ^ Use the ^/▼ Buttonsto adjust the image to the desired level. Use the AUTO/SET Button to select other sub-menu items. A] Push the MENU Button once to return to the main menu to select another function. Push the MENU Button twice to exit from the OSD. On Screen Display(OSD) Selection and Adjustment The following table indicates all the On Screen Display control, adjustment, and setting menus. Main menu Sub-menu A D H Reference CINEMA MODE To focus on the moving picture selected. AUTO BRIGHT To control screen brightness automatically. TIME CONTROL To mind user using time. LIVE SENSOR To control touch key distance. SMART To control smart key menu. EZ ZOOMING To adjust the resolution 4:3 IN WIDE To adjust the image size PHOTO EFFECT NORMAL To adjust screen color mode GAUSSIAN BLUR SEPIA MONOCHROME VOLUME To adjust the volume PICTURE BRIGHTNESS To adjust the brightness, contrast and gamma of the screen CONTRAST GAMMA **BLACK LEVEL To set offset level COLOR PRESET sRGB To costomize the color of the screen 6500K 9300K RED GREEN BLUE TRACKING HORIZONTAL To adjust the position of the screen VERTICAL CLOCK To improve the clarity and stability of the screen PHASE SHARPNESS SETUP LANGUAGE To costomize the screen status for a user's operating environment OSD HORIZONTAL POSITION VERTICAL *WHITE BALANCE "OVERSCAN RTC POWER INDICATOR FACTORY RESET FLATRON F-ENGINE MOVIE To select or customize desired image settings ‘INTERNET **GAME USER ‘NORMAL "STANDARD *DEMO **SPORTS • : Adjustable A DSUB Input * : only for DSUB/DVI Input D DVI Input ** : only for HDMI Input H HDMI Input NOTE ■ The order of icons may differ depending on the model (A11 ~A20). On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. Press the MENU Button, then the main menu of the OSD appears. Main Menu — COLOR TRACKING m m SETUP On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description * PICTURE PICTURE DSUB/DVI input HDMI input BRIGHTNESS To adjust the brightness of the screen. CONTRAST...