Votos - 5, Puntuación media: 4.2 ( )

Fabricar: Samsung Tamaño del archivo: 4.6 mb Nombre del archivo: Idioma del manual:

Visit for further details. Selecting an option will display a settings window. Figure 2-2: OSD Options Menu 2.4.4 Configuration Window The Configuration option on the Administrative Web Interface and OSD lets you configure various settings for the device. The tabs in the Configuration window are: Network IPv6 Label Discovery Session Language OSD Display Reset Each tab has the following buttons: OK, Cancel, and Apply. These buttons allow the administrator to accept or cancel the changes made. 362 Using "PCoIP" 2 2 Using "PCoIP" The OSD configuration options are a subset of the options available in the Administrative Web Interface. To make changes to the configuration settings, you will need an administrator password. You do not need a password to view the Diagnostic and Information menus. Applicable only when the Password item is available. Network Tab You can configure the host and client network settings from the Initial Setup page or Network page. After you update the parameters on this page, click Apply to save your changes. The Network parameters can also be configured using the Administrative Web Interface. Figure 2-3: Network Configuration • Enable DHCP When Enable DHCP is enabled, the device will contact a DHCP server to be assigned an IP address, subnet mask, gateway IP address and DNS servers. When disabled, the device requires these parameters to be set manually. • IP Address The IP address of the device. If DHCP is disabled, you must set this field to a valid IP address. If DHCP is enabled, you cannot edit this field. • Subnet Mask The subnet mask of the device. If DHCP is disabled, you must set this field to a valid subnet mask. If DHCP is enabled, you cannot edit this field. It is possible to configure an illegal IP address/subnet mask combination (e.g., invalid mask) making the device unreachable. Ensure you set the subnet mask properly. 372 Using "PCoIP" 2 2 Using "PCoIP" • Gateway The gateway IP address of the device. If DHCP is disabled, this field is required. If DHCP is enabled, you cannot edit this field. • Primary DNS Server The primary DNS IP address of the device. This field is optional. If the DNS server IP address is configured using the Connection Manager, the address may be set as an FQDN instead of an IP address. • Secondary DNS Server The secondary DNS IP address of the device. This field is optional. If the DNS server IP address is configured using the Connection Manager, the address may be set as an FQDN instead of an IP address. • Domain Name The domain name used (e.g., 'domain.local'). This field is optional. This field specifies the host or domain of the client. • FQDN The Fully Qualified Domain Name for the host or client. The default value is pcoip-host- or pcoipportal- where is the MAC address of the host or client. The domain name is appended if used (e.g., pcoip-host-.domain.local). This field is read-only on this page. • Ethernet Mode Lets you configure the E...

Descargar ahora

Introduzca dos números de la imagen: