Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
9. VGA OUT Outputs the VGA signal from the VGA IN jack. 10. VGA IN Connect to the VGA output of a computer. 11. RS232C (OUT/IN) RS232C network connection input/output for the use of loop through function. 12. VIDEO IN (COMPONENT) Component video input (YPbPr) for connecting to the component output of an AV device. 13. VIDEO IN (S-VIDEO) S-Video input for connecting to the S-Video output of an AV device. 14. VIDEO OUT Outputs the video signal from the VIDEO IN jack. 15. VIDEO IN Connect to the video output of an AV device or another BDL4681XU monitor. 1 2 3 4 5 6 7 8 10 11 12 9 13 15 14 User Manual BDL4681XU 2.3. REMOTE CONTROL 2.3.1. GENERAL FUNCTIONS POWER button Press to switch on the monitor from standby mode. Press again to turn it off to standby mode. SMART button To select smart picture mode from: • HIGHBRIGHT: for moving image such as Video • STANDARD: for images (factory setting) • sRGB: for text based images • CINEMA: for movies. • CUSTOM: use your own picture setting. The mode is automatically selected after you change the settings in the PICTURE menu. VIDEO SOURCE button To activate the video source selection menu. Press it repeatedly to select the video input source from HDMI, DVI-D, VGA, COMPONENT, S-VIDEO, and VIDEO. AUDIO SOURCE button To activate the audio source selection menu. Press it repeatedly to select the video input source from HDMI, AUDIO 1, AUDIO 2, and AUDIO 3. Picture format button To switch screen aspect ratio between FULL, NORMAL, DYNAMIC, CUSTOM, REAL, and 21:9. PIP (Picture In Picture) buttons • ON/OFF button: To turn PIP mode ON/OFF. • INPUT button: To select the input signal for the sub-picture. • CHANGE button: To exchange between the main picture and sub picture. Note: The “PIP” mode does not work if the screen size is set to “CUSTOM”, “DYNAMIC”, “REAL” or “21:9”. CONTRAST button Press to open the CONTRAST OSD selection, and then press the PLUS or MINUS button to adjust the value. BRIGHTNESS button Press to open the BRIGHTNESS OSD selection, and then press the PLUS or MINUS button to adjust the value. RETURN TO THE CONTENTS User Manual BDL4681XU DISPLAY button To turn on/off the setting information displayed on the upper right corner of the screen. MENU button To turn the OSD menu on/off. UP button • To move the highlight bar up to adjust the selected item when OSD menu is on. • To move the sub-picture up in “PIP” mode. DOWN button • To move the highlight bar down to adjust the selected item when OSD menu is on. • To move the sub-picture down in “PIP” mode. PLUS button • To increase the adjustment with OSD menu. • To move the sub-picture right in “PIP” mode. MINUS button • To decrease the adjustment with OSD menu. • To move the sub-picture left in “PIP” mode. SET button To activate the setting with OSD menu. AUTO ADJUST button Note: For the VGA input only. To execute the AUTO ADJUST function. EXIT button To turn to the previous OSD menu. MUTE button To turn the mute function on/off. VOL UP button To increase the audio output level. VOL DOWN button To decrease the audio output level. RETURN TO THE CONTENTS User Manual BDL4681XU RETURN TO THE CONTENTS 2.3.2. INSERTING THE BATTERIES IN THE REMOTE CONTROL 1. Remove the cover on the rear of the remote control. 2. Insert two AAA size 1.5V batteries ensuring that the “+” and “-” ends of the batteries are correctly aligned. 3. Replace the cover. Note: Do not mix battery types, e.g. alkaline and manganese. 2.3.3. OPERATING RANGE OF THE REMOTE CONTROL When pressing a remote control button, point the top of the remote control toward the remote control sensor from the rear side of the monitor. Use the remote control within a distance of about 5m/16ft from the monitor's remote control sensor and within a horizontal and vertical angle of 45 degrees. Note: The remote control may not function properly when the remote control sensor on the monitor is under direct sunlight or strong illumination, or when there is an obstacle in the path of signal transmission. User Manual BDL4681XU RETURN TO THE CONTENTS 3. CONNECTIONS TO EXTERNAL EQUIPMENT 3.1. USING THE CABLE RETAINER 3.2. USING THE SWITCH COVER You can use the switch cover to prevent the monitor from being turned on or off accidentally. 3.3. CONNECTING EXTERNAL EQUIPMENT (DVD/VCR/VCD) 3.3.1. USING COMPONENT VIDEO INPUT 1. Connect the green-colored (labeled as "Y") jack of the device to the green-colored "Y" jack of the monitor. 2. Connect the blue-colored (labeled as "Pb") jack of the device to the blue-colored "Pb" jack of the monitor. 3. Connect the red-colored (labeled as "Pr") jack of the device to the red-colored "Pr" jack of the monitor. 4. Connect the red (R) and white (L) audio jacks of the device to the AUDIO IN (AUDIO2 or AUDIO3) jacks of the monitor. DVD/VCR/VCD User Manual BDL4681XU RETURN TO THE CONTENTS 3.3.2. USING S-VIDEO INPUT 1. Connect the S-Video connector of the external device to the S-VIDEO input of the monitor. 2. Connect the red (R) and white (L) audio jacks of ...