Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
• V position adjustment is functional on all inputs, except HDMI, Card OPS, and DP In. • V position cannot be adjusted when Pixel Shift is activated. Clock Adjust the width of the image. NOTE: This item is functional for VGA input only. Clock phase Adjust to improve the focus, clarity and stability of the image. NOTE: This item is functional for VGA input only. Zoom mode The pictures you receive may be transmitted in 16:9 format (wide screen) or 4:3 format (conventional screen). The 16:9 pictures sometimes have a black band at the top and bottom of the screen (letterbox format). Zoom Mode will be deactivated when Pixel Shift is activated or turned on. This function allows you to optimize the picture display on screen. The following zoom modes are available for: • PC mode: {Full} / {Normal} / {Custom} / {Real}. • Video mode: {Full} / {Normal} / {Dynamic} / {Custom} / {Real} / {21:9}. Full This mode restores the correct proportions of pictures transmitted in 16:9 using the full screen display. Normal The picture is reproduced in 4:3 format and a black band is displayed on either side of the picture. Dynamic Fill the entire screen by stretching 4:3 pictures non-proportionally. Custom Choose to apply the custom zoom settings in the Custom Zoom submenu. Real This mode displays the image pixel-by-pixel on screen without scaling the original image size. 21:9 The picture is enlarged to 16:9 format. This mode is recommended when displaying pictures that have black bands at the top and bottom (letterbox format). Custom zoom You can use this function to further customize the zoom settings to suit the image you want to display. NOTE: This item is functional only when the Zoom mode setting is set to Custom. Zoom Expands the horizontal and vertical sizes of the image simultaneously. H zoom Expands the horizontal size of the image only. BDL3250EL V zoom Expands the vertical size of the image only. H position Moves the horizontal position of the image left or right. V position Moves the vertical position of the image up or down. Screen reset Reset all settings in the Screen menu to factory preset values. 4.2.3. Audio menu BalanceTrebleBassVolumeMinimum volumePictureScreenAudioPIPConfiguration1Configuration2Advanced optionMaximum volumeAudio sourceMuteAudio reset Balance Adjust to emphasize left or right audio output balance. Treble Adjust to increase or decrease higher-pitched sounds. Bass Adjust to increase or decrease lower-pitched sounds. Volume Adjust to increase or decrease the audio output level. Maximum volume Adjust your own limitation for the maximum volume setting. This stops the volume from being playing at too loud a level. Minimum volume Adjust your own limitation for the minimum volume setting. Mute Turn the mute function on/off. Audio source Select the audio input source according to the audio signal source connected to the audio input and HDMI sockets on the display. ...... ...... .... ........... ..... ...... Choose from: {Displayport} / {HDMI} / {Audio1} / {Audio2}. Audio reset Reset all settings in the Audio menu to factory preset values. 4.2.4. PIP menu PIPPIP inputPIP changePIP sizePIP resetPictureScreenAudioPIPConfiguration1Configuration2Advanced optionPIP audio PIP Select the PIP (Picture-in-Picture) mode. Choose from: {Off} / {PIP} / {POP} / {PBP aspect} / {PBP full}. PIP input Select the input signal for the sub-picture. PIP change Enlarges the smaller picture to become the main picture, and vice versa. PIP size Select the size of the sub picture in the PIP (Picture-in-Picture) mode. Choose from: {Small} / {Medium} / {Large}. PIP audio Select the audio source in the PIP (Picture-in-Picture) mode. • {Main} - Select audio from the main picture • {Sub} - Select audio from the sub picture. PIP reset Reset all settings in the PIP menu to factory preset values. NOTES: • The PIP function is available only for the following condition: {Configuration1} - {Panel saving} - {Pixel shift} setting to [Off] and {Advanced option} - {Tiling} - {Enable} setting to [No]. • The PIP function is available only for certain signal source combinations as shown in the table below. • The availability of the PIP function will also depend on the resolution of the input signal being used. BDL3250EL Main Picture Sub Picture Displayport HDMI DVI-D VGA YPbPr Video Displayport X X X O O O HDMI X X X O O O DVI-D X X X O O O VGA O O O X X X YPbPr O O O X X X Video O O O X X X (O: PIP function available, X: PIP function unavailable) By pressing the [PIP ON/OFF] button on the remote control, you can change the mode in the order shown below: PIPPOPPBP aspectPBP fullOff The resolutions in the PIP and POP modes are configured as follows: PIP SIZE {Small} : 320 x 240 pixels {Medium} : 480 x 320 pixels {Large} : 640 x 480 pixels POP SIZE : 474 x 355 pixels NOTE: The images displayed in the sub picture always fit the PIP sizes shown above irrespective of the aspect ratio of the input image. 4.2.5. Configuration1 menu Switch on stateAuto adju...