Votos - 0, Puntuación media: 0 ( )

Fabricar: Philips Tamaño del archivo: 2.28 mb Nombre del archivo: Idioma del manual:

. Uninterrupted display of still or static images over an extended period may cause "burn in", also known as "after-imaging " or "ghost imaging", on your screen. "Burnin", "after-imaging", or "ghost imaging" is a well-known phenomenon in LCD panel technology. In most cases, the "burned in" or "after-imaging" or "ghost imaging" will disappear gradually over a period of time after the power has been switched off. . Always activate a moving screen saver program when you leave your monitor unattended. . Always activate a periodic screen refresh application if your LCD monitor will display unchanging static content. . Severe” burn-in” or “after-image” or “ghost image” symptoms will not disappear and cannot be repaired. The damage mentioned above is not covered under your warranty. Image appears distorted.Text is fuzzy or blurred. . Set the PC’s display resolution to the same mode as monitor’s recommended screen native resolution. Green, red, blue, dark, and white dots appears on the screen . The remaining dots are normal characteristic of the liquid cr ystal used in today’s technology, Please refer the pixel policy for more detail. The "power on" light is too strong and is disturbing . You can adjust “power on” light using the power LED Setup in OSD main Controls. For fur ther assistance, refer to the Consumer Information Centers list and contact Philips customer ser vice representative. 9.2 SmartControl Lite FAQs Q1. I change the monitor on a PC to a different one and the SmartControl Lite becomes un-usable, what do I do? Ans.: Restar t your PC and see if Smar tControl Lite can work. Otherwise, you will need to remove and re-install Smar tControl Lite to ensure proper driver is installed. Q2. The SmartControl Lite functions worked well before, but it does not work anymore, what can I do? Ans.: If the following actions were executed, the monitor driver may need to be reinstalled. . Changed video graphic adapter to another one . Updated video driver . Activities on OS, such as ser vice pack or patch . Run Windows Update and updated monitor and/or video driver . Windows was booted with the monitor power off or disconnected. . To find out, please right click My Computer and click on Proper ties->Hardware-> Device Manager. . If you see "Plug and Play Monitor" shows under Monitor, then you need to re-install. Simply remove Smar tControl Lite and re-install it. Q3. After installing SmartControl Lite, when clicking on SmartControl Lite tab, nothing shows up after a while or a failure message shows, what happened? Ans.: It might be your graphic adaptor is not compatible with the Smar tControl Lite. If your graphic adaptor is one of the above mentioned brands, tr y to download the most updated graphic adaptor driver from 35 9. Troubleshooting & FAQs 9. Troubleshooting & FAQs corresponding companies’ web site. Install the driver. Remove Smar tControl Lite, and re-install it once more. If it is still not working, we are sorr y that the graphic adaptor is not suppor ted. Please visit Philips website and check if an updated Smar tControl Lite driver is available. Q4. When I click on Product Information, only partial information is shown, what happened? Ans.: It might be your graphic card adaptor driver is not the most updated version which fully suppor ting DDC/CI interface. Please tr y to download the most updated graphic adaptor driver from corresponding companies’ web site. Install the driver. Remove Smar tControl Lite and re-install it once more. Attention Theft mode enabled Q5. I forgot my PIN for Theft Deterrence Function.What can I do? Ans.: Philips Ser vice center has a right to ask for legitimate identification and authorization, in order to establish ownership of the monitor. Please note that the anti-theft deterrence function is provided as a convenient free option. Managing PIN numbers is the sole responsibility of the individual user or the organization who sets it. In case the PIN number is forgotten, Philips ser vice center can re-set it for you at a nominal charge after verification of ownership. Please note that this activity is not covered by standard warranty terms. 9.3 General FAQs Q1: When I install my monitor what should I do if the screen shows 'Cannot display this video mode'? Ans.: Recommended resolution for this monitor : 1920 x 1080 @ 60 Hz. . Unplug all cables, then connect your PC to the monitor that you used previously. . In the Windows Star t Menu, select Settings/ Control Panel. In the Control Panel Window, select the Display icon. Inside the Display Control Panel, select the 'Settings' tab. Under the setting tab, in box labelled 'desktop area', move the sidebar to 1920 x 1080 pixels. . Open 'Advanced Proper ties' and set the Refresh Rate to 60 Hz, then click OK. . Restar t your computer and repeat step 2 and 3 to verify that your PC is set at 1920 x 1080 @ 60 Hz. . Shut down your computer, disconnect your old monitor and reconnect your Philips LCD monitor. . Turn on your monitor and then turn...

Descargar ahora

Introduzca dos números de la imagen: