Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Monitores - 170B6CS/27 (431.74 kb)
Monitores - 170B6CS/27 (885.82 kb)
Resumen del manual
Power cord VGA signal cable EDFU pack PC audio cable (lime) Mac adaptor (optional) USB cable DVI Cable (for /27 and /96 only) RETURN TO TOP OF THE PAGE Connecting to Your PC 1) Plug the power cord into monitor firmly. Note: If you use an Apple Macintosh, you need to connect the special Mac adapter to one end of the monitor signal cable Cable management a) Remove the top cover of the arm box b) Put the cables inside the arm box c) Put the top cover back 2) Connect to PC (a) Turn off your computer and unplug its power cable. (b) Connect the monitor signal cable to the video connector on the back of your computer. (c) Plug the power cord of your computer and your monitor into a nearby outlet. (d) Turn on your computer and monitor. If the monitor displays an image, installation is complete. 3) USB plug (a) Connect USB upstream port on monitor and the USB port on PC with a USB cable. (b) The USB downstream port is now ready for any USB device to plug in Note: The USB plug is a pass through connection whether it can support USB 1.1 or USB 2.0 depends on your PC's specification. RETURN TO TOP OF THE PAGE • Front View Product Description • Accessory Pack • Connecting to your PC • Getting Started • Optimizing Performance • Unfold the Base • Fold the Base • Remove the Base The Base Unfold and Fold the Base Unfold the Base 1) Put monitor face down on the safe surface. 2) Pull up the base. Fold the Base 1) Push down the head of monitor. RETURN TO TOP OF THE PAGE Remove the Base Condition: l for VESA standard mounting applications 1) Remove the top cover. 2) Remove the 4 screws and then remove the base from the LCD monitor. Note: This monitor accepts a 100mmx100mm VESACompliant mounting interface. RETURN TO TOP OF THE PAGE Your LCD Monitor : • Front View Product Description • Connecting to Your PC • Getting Started • Optimizing Performance Getting Started Getting Started Use the information file ( .inf) for Windows® 95/98/2000/Me/XP or later The built-in VESA DDC2B feature in Philips Monitors supports Plug & Play requirements for Windows® 95/98/2000/Me/XP. This information file ( .inf) should be installed in order that your Philips monitor can be enabled from the 'Monitor' dialog box in Windows® 95/98/2000/Me/XP and the Plug & Play application can be activated. The installation procedure based on Windows® '95 OEM Release 2 , 98 , Me, XP and 2000 is specified as follows. For Windows® 95 1. Start Windows® '95. 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, point to 'Change...' then click on 'Have Disk...'. 6. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button. 7. Click on the 'OK' button then select your monitor model and click on 'OK'. 8. Click on the 'Close' button. For Windows® 98 1. Start Windows® 98. 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, point to 'Change...' then click on 'Next' 6. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want.' then click on 'Next' and then click on 'Have Disk...'. 7. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button. 8. Click on the 'OK' button then select your monitor model and click on the 'Next' button. 9. Click on the 'Finish' button then the 'Close' button. For Windows® Me 1. Start Windows® Me. 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select the 'Monitor' button, then click on 'Change...' button. 6. Select 'Specify the location of the driver(Advanced)' and click on the 'Next' button. 7. Select 'Display a list of all the drivers in a specific location, so you can choose the driver you want', then click on 'Next' and then click on 'Have Disk...'. 8. Click on the 'Browse...' button, select the appropriate drive F: ( CD-ROM Drive) then click on the 'OK' button. 9. Click on the 'OK' button, select your monitor model and click on the 'Next' button. 10. Click on 'Finish' button then the 'Close' button. For Windows® 2000 1. Start Windows® 2000. 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active. Click on 'Properties' button. Please follow the steps given below. 6. Click on 'Driver' and then click on 'Update Driver...' then click on the 'N...
Otros modelos de este manual:Monitores - 170B6CB/27 (702.93 kb)