Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
l Adjustable tilt and swivel function l Rotation for both portrait and landscape display RETURN TO TOP OF THE PAGE Technical Specifications* LCD PANEL • Type TFT LCD • Screen size 17.1" / 43.4cm visual • Pixel Pitch 0.291 x 0.291mm • LCD Panel type 1280 x 768 pixels R.G.B. vertical stripe Anti-glare polarizer hardness • Effective viewing area 372.48 x 223.49 mm • Display Colors 8 bits (16M colors) SCANNING Vertical refresh rate 56Hz-75Hz Horizontal Frequency 30kHz-64kHz VIDEO • Video dot rate 75MHz • Input impedance - Video 75 ohm - Sync 2K ohm • Input signal levels 0.7 Vpp • Sync input signal Separate sync Composite sync Sync on green • Sync polarities Positive and negative • Video interface Dual input (two connectors): D-Sub (analog) and DVI-D (digital) are available and user selectable Optical characteristics • Contrast ratio: 350 (typ.) • Brightness: 450 cd/m2 (typ.) • Peak contrast angle: 6 o'colock • White Chromatcity: x: 0.283 y: 0.297 (at 9300°K) x: 0.313 y: 0.329 (at 6500°K) • Viewing Angle: (C/R>5) Upper >50° (typ.) Lower >70° (typ.) Left >75° (typ.) Right >75° (typ.) • Viewing Angle: (C/R>10) Upper >45° (typ.) Lower >45° (typ.) Left >60° (typ.) Right >60° (typ.) • Response time <25ms (typ.) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Resolution & Preset Modes • Maximum 1280 x 768 at 75Hz • Recommended 1280 x 768 at 60Hz 30 user definable modes 15 factory preset modes: H. freq (kHz) Resolution V. freq (Hz) 31.5 640*350 70 31.5 720*400 70 31.5 640*480 60 35.0 640*480 67 37.5 640*480 75 35.2 800*600 56 37.9 800*600 60 46.9 800*600 75 49.7 832*624 75 48.4 1024*768 60 60.0 1024*768 75 44.4 1280*768 56 47.7 1280*768 60 60.1 1280*768 75 52.5 1280*720 70 A Hot-Key has been implemented to switch between "1024x768" and "1280x768" Analog Mode @75Hz. The Hot-Key can be activated by simultaneously pressing the display control key "DOWN" and "LEFT" in the front bezel of the monitor. RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. If an input from a keyboard, mouse or other input device is detected, the monitor will 'wake up' automatically. The following table shows the power consumption and signaling of this automatic power saving feature: Power Management Definition VESA Mode Video H-sync V-sync Power Used LED color ON Active Yes Yes < 40 W Blue OFF Blanked No No < 1W Amber This monitor is ENERGY STAR® compliant. As an ENERGY STAR® Partner, PHILIPS has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. RETURN TO TOP OF THE PAGE Physical Specifications • Dimension (WxHxD) 417 x 374 x 180 mm (incl. Pedestal) • Weight 6 kg • Tilt / Swivel - 5° ~ 35° / + - 175° • Power supply 100 — 240 VAC, 50/60 Hz • Power consumption 35 W (typ.) • Temperature 5° C to 35° C (operating) -20° C to 60° C (storage) • Relative humidity 20% to 80% • System MTBF 50K hrs (including CCFL 50K hrs) * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment 1. The digital only connector contains 24 signal contacts organized in three rows of eight contacts. Signal pin assignments are listed in the following table: Pin No. Signal Assignment Pin No. Signal Assignment Pin No. Signal Assignment 1 T.M.D.S. Data2- 9 T.M.D.S. Data1- 17 T.M.D.S. Data0- 2 T.M.D.S. Data2+ 10 T.M.D.S. Data1+ 18 T.M.D.S. Data0+ 3 T.M.D.S. Data2/4 Shield 11 T.M.D.S. Data1/3 Shield 19 T.M.D.S. Data0/5 Shield 4 No connect 12 No connect 20 No connect 5 No connect 13 No connect 21 No connect 6 DDC Clock 14 +5V Power 22 T.M.D.S. Clock Shield 7 DDC Data 15 Ground (for +5V) 23 T.M.D.S. Clock+ 8 No connect 16 Hot Plug Detect 24 T.M.D.S. Clock- 2. The 15-pin D-sub connector (male) of the signal cable: Pin No. Assignment Pin No. Assignment 1 Red video input 9 DDC +5V 2 Green video input 10 Logic ground 3 Blue video input 11 Identical output - connected to pin 10 4 Identical output - connected to pin 10 12 Serial data line (SDA) 5 Cable detect 13 H. Sync / H+V 6 Red video ground 14 V. Sync 7 Green video ground 15 Data clock line (SCL) 8 Blue video ground RETURN TO TOP OF THE PAGE Product Views Follow the links to see various views of the monitor and its components. Front View Product Description RETURN TO TOP OF THE PAGE Physical Function 1) Tilt 2) Swivel RETURN TO TOP OF THE PAGE Installing your LCD Monitor Your LCD Monitor : Front View Product Description • Connecting to Your PC • Remove and re-install the base • Getting Started • Optimizing Performance Front View Product Description UP and DOWN buttons are used when adjusting the OSD of your monitor LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are pressed, the adjustment controls for the BRIGHTNESS will show up. OK button which when pressed will take you to the OSD ...
Otros modelos de este manual:Monitores - 170W4P74 (407.96 kb)