Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Prohibited Important to read and understand at all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to prevent an electric shock When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. !This may cause an electric shock or fire. When not used for extended periods of time, set your PC to DPMS. If using a screen saver, set it to the active screen mode. Do not use a damaged or loose plug. !This may cause an electric shock or fire. Notational Power Installation Cleaning Other Do not pull the plug out by the wire nor touch the plug with wet hands. • This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. • An improper ground may cause electric shock or equipment damage. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. • This may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. • This may cause a fire. Put your monitor in a location with low humidity and a minimum of dust. !An electric shock or fire could result inside the monitor. Do not drop the monitor when moving it. !This may cause damage to the product or human body. Put your monitor in a location with low humidity and a minimum of dust. !An electric shock or fire could result inside the monitor. Do not drop the monitor when moving it. !This may cause damage to the product or human body. Notational Power Installation Cleaning Other Place the monitor on a flat and stable surface. • The monitor can cause injury by falling. Set down the monitor carefully. • It could be damaged or broken. Do not place the monitor face down. • The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. • Installation by unqualified personnel may result in injury. • Always use the mounting device specified in the owner's manual. Leave a space for ventilation between the product and the wall. • Poor ventilation may cause the interior temperature to rise and lead to a fire. When cleaning the monitor case or the surface of the TFT-LCD, wipe with a slightly moistened, soft fabric. Notational Power Do not spray water or detergent directly on the monitor. Installation Cleaning • This may cause damage, electric shock or a fire. Other Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. • A dirty connector can cause an electric shock or fire. Contact a Service Center or Customer Center for interior cleaning once a year. • Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or a fire. Notational Power Installation Cleaning Other Do not remove cover (or back). No user serviceable parts inside. • This may cause an electric shock or a fire. • Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. • This may cause an electric shock or fire. Be careful not to let water drip into the monitor or expose the monitor to moisture. • This may cause malfunction, an electric shock or a fire. • Especially avoid operating the monitor near water or outdoors where it could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. • The monitor may malfunction, causing an electric shock or a fire. • Then contact the Service Center. Keep the power off when there is thunder and lightening outside, or let the monitor remain unused for an extended period of time. • The monitor may malfunction, causing an electric shock or a fire. Do not try to move the monitor by pulling on the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not move the monitor right or left by pulling only the wire or the signal cable. • This may cause a breakdown, electric shock or a fire due to damage to the cable. Do not cover the vents on the monitor cabinet. • Bad ventilation may cause a breakdown or fire. Do not place any heavy objects on the monitor. • This may cause malfunction, an electric shock or a fire. Do not place water containers, chemical products or small metal objects on the monitor. • This may cause malfunction, an electric shock or a fire. • If a foreign substance enters the monitor, unplug the power cord and contact the Service Center. Do not use or store inflammable substances near the monitor. • This may cause an explosion or fire. Notational Power Installation Cleaning Other Never insert anything metallic into the monitor openings. • This may cause an electric shock, fire or injury. Do not insert metal objects such as utensi...