Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
(Refer to the owner’s manual for the digital set-top box.) Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control. 2 3 1 NOTE > >Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable. Connecting with an HDMI to DVI cable 1 Connect the digital set-top box to HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET. Connect the audio output of the digital set-top box to the AUDIO IN (RGB/DVI) jack on the SET. Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control. 2 3 4 2 1 DVD SETUP Connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN VIDEO jacks on the SET. Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks on the SET. Turn on the DVD player, insert a DVD. Select Component input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. 2 3 4 2 1 5 Component Input ports To achieve better picture quality, connect a DVD player to the component input ports as shown below. Component ports on the SET Y PB PR Video output ports on DVD player Y PB PR Y B-Y R-Y Y Cb Cr Y Pb Pr Connecting with a Euro Scart cable 1 Connect the Euro scart socket of the DVD to the AV1 Euro scart socket on the SET. Turn on the DVD player, insert a DVD. Select AV1 input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. 2 3 1 4 Scart Input Output Video Audio RGB Video, Audio AV1 O O O Analogue TV, Digital TV Output Type Current input mode AV1 (TV Out) AV1 (When DTV scheduled recoring is in progress using recording equipment) Digital TV Digital TV O Analogue TV, AV Analogue TV O (The input mode is converted to DTV) Component / RGB Analogue TV HDMI X > > TV Out : Outputs Analogue TV or Digital TV signals. NOTE > >Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the AV 1 can be received. These signals are transmitted, for example, by a paid TV decoder, game machine or photo CD unit, etc. > >Please use shielded scart cable. Connecting the HDMI cable 1 Connect the HDMI output of the DVD to the HDMI/DVI IN 1 or HDMI/DVI IN 2 jack on the SET Select HDMI 1 or HDMI 2 input source using the INPUT button on the remote control. Refer to the DVD player's manual for operating instructions. 2 3 1 NOTE > >Check that your HDMI cable is High Speed HDMI Cable. If the HDMI cables are not High Speed HDMI Cable, flickering or no screen display can result. Please use the High Speed HDMI Cable. VCR SETUP ¦ ¦ To avoid picture noise (interference), allow adequate distance between the VCR and SET. Connecting with a RF cable 1 2 Wall Jack Antenna 1 Connect the ANT OUT socket of the VCR to the ANTENNA / CABLE IN socket on the SET. Connect the antenna cable to the ANT IN socket of the VCR. Press the PLAY button on the VCR and match the appropriate channel between the SET and VCR for viewing. 2 3 Connecting with a Euro Scart cable 1 Connect the Euro scart socket of the VCR to the AV1 Euro scart socket on the SET. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select AV1 input source using the INPUT button on the remote control. Refer to the VCR player's manual for operating instructions. 2 3 1 4 Scart Input Output Video Audio RGB Video, Audio AV1 O O O Analogue TV, Digital TV Output Type Current input mode AV1 (TV Out) AV1 (When DTV scheduled recoring is in progress using recording equipment) Digital TV Digital TV O Analogue TV, AV Analogue TV O (The input mode is converted to DTV) Component / RGB Analogue TV HDMI X > > TV Out : Outputs Analogue TV or Digital TV signals. NOTE > >Signal type RGB, i.e. the signals red, green and blue can only be selected for the Euro scart and the AV 1 can be received. These signals are transmitted, for example, by a paid TV decoder, game machine or photo CD unit, etc. > >Please use shielded scart cable. Connecting with a RCA cable 1 Connect the AUDIO/VIDEO jacks between SET and VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) Select AV2 input source using the INPUT button on the remote control. 2 3 1 NOTE > >If you have a mono VCR, connect the audio cable from the VCR to the AUDIO L / MONO jack of the SET. INSERTION OF CI MODULE - - To view the encrypted (pay) services in digital TV mode. - - This feature is not avai lable in al l countries. 1 Insert the CI Module to PCMCIA (Personal Computer Memory Card International Association) CARD SLOT of SET as shown. For further information, see p.61 NOTE > >Check if the CI module is inserted into the PCMCIA card slot in th...