Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
5) Press the button and then use button to set the minutes(00 min to 59 min). 6) Press the button ,According to the personal needs, choose to add button. Sleep timer The power is automatically turned off when the time set by a user is passed. 1) Press the MENU button and then use button to select the Time menu,input OK button to enter 2) Press the button and then use button to select Sleep timer menu. 3) Press the button and then use button to select the minutes(Off to 240 min). Auto off If Auto off is active and there is no input signal, the set switches to off mode automatically after 15 minutes. 1) Press the MENU button and then use button to select the Timer menu, input OK button to enter. 2) Press the button and then use button to select the Auto off menu. 3) Press the button and then use button to select On or Off. Power on delay When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload. • Once the on or off time is set, these functions operate daily at the preset time. • The scheduled power-off function works properly only when the device time is set correctly. When the scheduled power-on and power-off times are the same, the power- off time has priority over the power-on time if the set is turned on, and vice versa if the set is turned off. • When On time is operated, input screen is turned on as it was turned off. Note User Menus Selecting the Options OPTION OK Move Language : English Language : English Input Label Key Lock : Off Set ID : Off ISM Method : Normal DPM Select : On Power Indicator : On Interface Select : RS232C Ў Language Chooses the language in which the control names are displayed. Input Label Selects a label for each input source. For example, when connecting to PC in RGB mode, * Select "PC" for the connecting device field. Otherwise, the screen may not display properly. Key Lock Use .. to select On or Off. The set can be set up so that it can only be used with the remote control. This feature can prevent unauthorized viewing. To lock OSD screen adjustment, set the Key Lock tab to the 'On' position. To unlock it, do the following: Push MENU on the remote control and set Key Lock to the 'Off' position. Set ID You can assign a unique Set ID NO (name assignment) to each set when several set are connected for display. Specify the number (1 to 99) using < > and exit. Use the assigned Set ID to individually control each set using the Set Control Program. ISM Method Leaving a fixed image on the screen for a long time may cause image burn-in. To use the set for a long period of time, use a screen saver on the PC or utilize the residual image prevention function on the set, and when the set is not used, turn the power off. Burn-in and related problems are not covered by the warranty on this set. Normal: Leave on normal if you don't foresee image burn in being a problem. Orbiter: May help prevent ghost images. However, it is best not to allow any fixed image to remain on the screen. To avoid a permanent image on the screen, the screen will move every 2 minutes. Inversion: This function inverts the panel color of the screen. The panel color is automatically inverted every 30 minutes. White wash: White wash fills the screen with solid white. This helps removes permanent images burned into the screen. A permanent image may be impossible to clear entirely with white wash. User Menus Selecting the Options OPTION OK Move ^ ISM Method : Normal DPM Select : On Power Indicator : On Interface Select : RS232C Network Setup Information Factory Reset DPM Select : On DPM Select Turns power saving on/off. Power Indicator Sets the power indicator on the front side of the set to On or Off. If you set to Off, it will go Off. If you set On at any time, the power indicator will automatically be turned on. Interface Select Sets up network connections. - Network: LAN - Enables communication via Ethernet. - RS-232C: Enables communication via Serial. Network Setup - DHCP: Allocates and sets up IP automatically. - Manual: Sets up IP address, Gateway, Subnet Mask, Primary DNS and Secondary DNS. The setup process is complete when you select Execute, and "IP Setup Completed" is displayed at the bottom of the screen. While "Wait for IP Setup" is displayed, you cannot use the local keys and remote control. "Wait for IP Setup" is displayed for up to 40 seconds. *If Network select is set to RS232C.DHCP and Manual are disabled. Information You can find information about your set serial number, F/W version, IP address and MAC address here. Factory Reset Returns the set to the default factory settings. User Menus Adjusts the USB Options. When connecting the USB device When you connect a USB device, this popup menu is displayed, automatically. “POPUP MENU” will not be displayed while the OSD including Menu, EPG or Schedule list is activated. When the Popup menu appears, you can select Music List, Photo List or Movie List in the MY MEDIA menu. In USB device, you canno...