Votos - 0, Puntuación media: 0
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
Q: Making a Bootable USB Flash Disk A: 1) You can turn a common 512-MB or bigger USB storage media into a bootable disk using a USB bootable disk creation tool. (For example, the HP USB Disk Storage Format Tool) A: 2) Copies the OS ghost image and executables to your USB disk. A: 3) Enter the BIOS menu of your set by pressing the F2 key in the BIOS logo screen. Then, enable the USB Boot First option by selecting that option and pressing the Enter key in the Boot menu. A: 4) Switch your set on while your USB disk is connected and boot up in DOS mode. A: 5) Run C:\ghost.exe and choose Local > Partition > From Image from the menu. Choose the ghost image to update your USB disk with and choose the target disk. A: 6) When the ghost image update finishes, the set will be rebooted automatically. Q & A Q: How can I change the frequency? A: The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) Q: How can I Adjusts the resolution? A: Windows XP: Set the resolution in the Control Panel > Appearance and Themes > Display > Settings. A: Windows ME/2000: Set the resolution in the Control Panel > Display > Settings. * Contact the video card manufacturer for details. Q: How can I set the Power Saving function? A: Windows XP: Troubleshooting Set the resolution in the Control Panel >Appearance and Themes >Display >Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). A: Windows ME/2000: Set the resolution at the Control Panel > Display > Screen Saver. Set the function in the BIOS-SETUP of the computer. (Refer to the Windows / Computer Manual). Q: How can I clean the outer case/LCD Panel? A: Disconnect the power cord and then clean the LCD Display with a soft cloth, using either a cleaning solution or plain water. Do not leave any detergent or scratches on the case. Do not let any water enter the LCD Display. Q: How can I play the video? A: The video supports the MPEG1 and WMV codecs only. Install the corresponding codec to play the video. Note that some of the codecs can be incompatible. Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Specifications General General Model Name SyncMaster 400MX(n) SyncMaster 460MX(n) LCD Panel Size Display area Pixel Pitch SyncMaster 400MX(n) SyncMaster 460MX(n) SyncMaster 400MX(n) SyncMaster 460MX(n) SyncMaster 400MX(n) 40 " Diagonal (101 cm) 46 " Diagonal (116 cm) 885.17 mm (H) X 497.7 mm (V) 1018.08 mm (H) X 572.7 mm (V) 0.648 mm (H) X 0.648 mm (V) SyncMaster 0.53025 mm (H) x 0.53025 mm (V) 460MX(n) Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 85 Hz Display Color 16.7 M Resolution Optimum resolu-SyncMaster 1360 x 768 @ 60 Hz/1366 x 768 @ 60 Hz detion 400MX(n) pends on graphics card used SyncMaster 1920 x 1080 @ 60 Hz 460MX(n) Maximum resolu-SyncMaster 1920 x 1080 @ 60 Hz (RB) tion 400MX(n) SyncMaster 1920 x 1080 @ 60 Hz 460MX(n) Input Signal, Terminated RGB Analog, DVI(Digital Visual Interface) Compliant Digital RGB 0.7 Vp-p ±5 % Separate H/V sync, Composite, SOG TTL level (V high . 2.0 V, V low . 0.8 V) Specifications Maximum Pixel Clock 165MHz (Analog,Digital) Power Supply AC 100 - 240 V~ (+/- 10 %), 50/60 Hz ± 3 Hz Signal Cable 15pin-to-15pin D-sub cable, Detachable DVI-D to DVI-D connector, Detachable Dimensions (W x H x D) / Weight SyncMaster 400MX 971.0 x 582.0 x 119.0 mm / 38.2 x 22.9 x 4.7 inch (Without (n) Stand) 971.0 x 643 x 311.0 mm / 38.2 x 25.3 x 12.2 inch (With Stand) / 19.0 kg / 41.9 lbs (With protection glass-option) 22.5 kg / 49.6 lbs SyncMaster 460MX 1102.0 x 658.0 x 125.5 mm / 43.4 x 25.9 x 4.9 inch (Without (n) Stand) 1102.0 x 719.0 x 311.0 mm / 43.4 x 28.3 x 12.2 inch (With Stand) / 27.0 kg / 59.5 lbs (With protection glass-option) 32.0 kg / 70.5 lbs VESA Mounting Interface 600 x 400 mm Environmental considerations Operating Temperature : 50°F ~ 104°F (10°C ~ 40°C) Humidity : 10 % ~ 80 %, non-condensing Storage Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5 % ~ 95 %, non-condensing Plug and Play Capability This LCD Display can be installed on any Plug & Play compatible system. The interaction of the LCD Display and the computer systems will provide the best operating conditions and LCD Display settings. In most cases, the LCD Display installation will proceed automatically, unless the user wishes to select alternate settings. Dot Acceptable TFT-LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without any problems. For exampl...
Otros modelos de este manual:Monitores - 400MXN (4.38 mb)
Monitores - 460MX (4.38 mb)
Monitores - 460MXN (4.38 mb)