Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Taking back/Recycling Information for Customers Philips establishes technically and economically viable objectives to optimize the environmental performance of the organization's product, service and activities. From the planning, design and production stages, Philips emphasizes the important of making products that can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back initiatives and recycling programs whenever possible, preferably in cooperation with competitors, which recycle all materials (products and related packaging material) in accordance with all Environmental Laws and taking back program with the contractor company. Your display is manufactured with high quality materials and components which can be recycled and reused. To learn more about our recycling program please visit: com/sites/philipsglobal/about/sustainability/ ourenvironment/productrecyclingservices.page. 4 2. Setting up the monitor 2.1 Installation Package contents AC/DC AdapterVGA Cable (Optional)Audio Cable (Optional) © 2013 Koninklijke Philips N.V. All rights reserved. Unauthorized duplication is a violation of applicable laws. Made and printed in China. VersionPhilips and the Philips’ Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license from Koninklijke Philips N.V. Monitor driversSmartControl softwareUser’s Manual ............................ SMART All-in-One Note • Use only the AC/DC adapter provided by Philips. • Do not install the SMART All-in-One in a location near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock. • Save the original shipping carton and packing materials, as they will come in handy if you ever have to ship your monitor. • For maximum protection, repackage your monitor as it was originally packed at the factory. • To keep the SMART All-in-One looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the SMART All-in-One before cleaning it. • Do not scratch the screen with hard things, it may cause permanent damage. • Don’t leak liquid into monitor which will result in the damage of component. Connection 116109878654321 1 DC Power Input 2 SDHC Card Slot 3 VGA Input (D-Sub) 4 HDMI Input 5 LAN Port (RJ-45) 6 USB Downstream (Type-A) 7 USB Upstream (Type-B) 8 Micro-USB (Mini-A) 9 Earphone Output (3.5 mm Stereo) 10 Audio Input (3.5 mm Stereo) 11 Kensington Anti-theft Lock 5 Insert your SD card 1. Disconnect the power cord. 2. Insert your SDHC card to the card slot. Connect for VGA/HDMI input 1. Connect with VGA or HDMI cable from your PC or AV device to SMART All-in- One. 2. Connect power cord to SMART All-in-One firmly and press the power button on. 3. The SMART All-in-One turns on and enters the previous source input selected. 4. Press the input button to select VGA or HDMI source. Connect to either WiFi or Ethernet for SMART All-in-One input 1. Connect RJ-45 LAN cable to your LAN port for wired connection. 2. Connect power cord to SMART All-in-One firmly and press the power button on. 3. The SMART All-in-One turns on and enters the previous source input. selected 4. Press the input button to select Android source. 5. Turn on the WiFi or Ethernet function in the Android system settings screen. Adjusting viewing angle For optimal viewing, it is recommended to look at the full face of the SMART All-in-One, then adjust the SMART All-in-One’s angle to your own preference. The SMART All-in-One's tilted angle is adjustable from 12° to 54°. Note • Do not touch the LCD screen when you adjust the angle. It may cause damage or break the LCD screen. • Careful attention is required not to catch your fingers or hands when you adjust the angle. • It is recommended to stabilize with a fixed point in order to lock the stand if the tilted angle is equal to or over 12°. • Do not adjust the tilt angle less than 12°. The monitor may fall caused by instability. • For displays with glossy bezels the user should consider the placement of the display as the bezel may cause disturbing reflections from surrounding light and bright surfaces. 2.2 Operating the monitor SMART All-in-One allows you to either use it as a stand-alone SMART All-in-One in Android system without any PC connection required, or as a normal PC monitor when connecting with PC. Front control 5342111109678 1 Power indicator 2 Press to turn SMART All-in- One’s power ON or OFF. 3 Press to access the OSD menu for VGA and HDMI input. In the OSD menu, press to confirm the OSD adjustment. 4 In the OSD menu, adjust the OSD menu. 5 Hotkey for internal speakers volume control. 6 Press to select the input source: VGA, HDMI, or Android. 7 In th...
Otros modelos de este manual:Monitores - S221C3AFD/01 (2.34 mb)