Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
LCD monitor Quick start guide DVI cable (Option) AC power cord Audio Cable (Option) DP cable (Option) USB cable (Option) HDMI Cable (Optional) MHL cable (Optional) MHL cable (optional) MiniDP-DP LCD monitor 2 ATTACHING/REMOVING THE BASE Install: Align the base with the stand and push the base towards the top of the monitor, and then rotate the base clockwise. Tighten the screw clockwise. Remove: Reverse the steps to remove the base. English 3 SCREEN POSITION ADJUSTMENT In oder to optimize the best viewing position, you can adjust the height/tilt/ swivel/pivot of the monitor. • Tilt Please see the illustration below for an example of the tilt range. • Height Adjustment After pressing the top of the monitor then you can adjust the height of the monitor. English 1 2 150mm 5o 25o Only at the highest point can 25 degrees of recline be offered for the angle of elevation. 4 English • •••S w i v e l leviwSleviwSlevSSS iwleviwwivel With the built-in pedestal, you can swivel the monitor for the most comfortable viewing angle. o6060 5 Connecting the power cord • Check first to make sure that the power cord you use is the correct type required for your area. • The monitor has a universal power supply that allows operation in either 100/120 V AC or 220/240 V AC voltage area. No user-adjustment is required. • Plug one end of the power cord to the AC inlet, and plug the other end into an AC outlet. • For units using 120 V AC: Use a UL-listed cord set, type SVT wire and plug rated 10 A/125 V. • For units using 220/240 V AC: Use a cord set consisting of H05VV-F cord and plug rated 10 A/250 V. The cord set should have the appropriate safety approvals for the country in which the equipment will be installed. Power saving The monitor will be switched to "power saving" mode by the control signal from the display controller, as indicated by the amber-colored power LED. Mode LED light On Blue Power saving Amber The power saving mode will be kept until a control signal ...