Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
2 Switch on the display by pushing the Power key (9). 3 If necessary, select a suitable resolution in the computer operating system. Please refer to Appendix A, "Possible resolutions" in the back of this manual. Note: The recommended resolution for best image quality is 1280x1024 at 60 Hz. The microcontroller in the display checks if the connected video signal has been adjusted before, and if these adjustments have been stored in the memory. There are 2 possibilities: a) The video signal has been adjusted and stored in the memory. In this case, the display switches to this memory location (the so-called mode) and the image will need no further adjustments. b) The video signal has not been adjusted and stored yet. In this case, the display will auto-size the picture and store the settings in one of the user modes. 2.5 Install the DICOM Optimizer software Proceed as follows: Install the CD-ROM in the CD-ROM drive. The CD-ROM starts automatically. Please follow the instructions on the screen. The CD-ROM contains user instructions about the usage of the DICOM Optimizer. MFCD 1218 User's Guide 3. ON-SCREEN DISPLAY (OSD) MENUS 3.1 How to use the OSD Proceed as follows: 1 Press the Menu key (5) on the front to display the OSD main menu. Note: It may be possible that the OSD menu does not appear. If this is the case, the front Controls are locked. To unlock them, please follow the procedure described in § 3.2 below. 2 Press the <+> key (7) or <-> key (6) to scroll to the desired menu item. 3 Press the Menu key (5) to activate the selected function or to enter the selected secondary (5) (6) (7) menu. 4 If you have activated a function: a)Press the <+> key (7) or <-> key (6) to change the value. b)Press the Menu key (5) to enter the new value and return to the menu. 5 To exit the OSD while saving the changes, select Save & Exit. To exit the OSD without saving the changes, select Cancel. Main Menu - (Down) + (Up) Brightness ContrastAuto Adjust H Position V Position ColorClock LanguagesInput Type Lock Controls Cancel Save & Exit 35 50 75 29 > > > > A1 1024 x 768 -60.1 48.4k Note: The OSD disappears automatically after an Highlighted bar inactivity period of 30 seconds. The color of the highlight bar indicates the status of the mode. RED indicates the function is selected and ready to be adjusted. Blinking RED indicates OSD is in parameter adjusting mode. Input type Resolution MFCD 1218 User's Guide 3.2 Description of the menu items Main menu Function Description Brightness To adjust the overall image and background brightness level. Contrast To adjust the image brightness in relation to the background (the background is unchanged). Auto Adjust * To automatically set the H Position, V Position and Clock. Horizontal Position* To move the screen horizontally left or right. Vertical Position* To move the screen vertically upward or downward. Color To adjust parameters for the screen colors of Red, Green and Blue. Clock To adjust the function only when characteristics are blurred. Languages To select English, French, Italian, German or Spanish for OSD language. Input Type To select Analog (A1), DVI-D (D), or S-Video (SV) input source. Lock Controls ** When locked, the OSD menu will not appear when pressing the Menu key. Cancel To restore the previous setting. Save & Exit To save the adjustments and quit the OSD menu. *The Auto Adjust and Horizontal/ Vertical Position cannot function under the S-Video input type. *Auto Adjust function will be automatically executed whenever the system is switched to a new mode. When the system is changed to this mode again later on, the system will not repeat the Auto Adjust function. This function is only valid when the mode concerned is selected for the first time. MFCD 1218 User's Guide Video menu Video Menu - (Down) + (Up) Brightness 35 Contrast 50 Saturation 50 Hue 60 Input Type > Lock Controls Cancel Save & Exit SV 1024 x 768 - 60.1 48.4k **To unlock the Controls, proceed as follows: 1 Press the Power key to switch off the display 2 With one hand, press and hold the <+> and the <-> key at the same time. With the other hand, press the Power key shortly to switch the display on again. 3 Keep holding the <+> and the <-> key for about 3 seconds. 4 At last, release the <+> and the <-> key. Now, by pressing the Menu key, the OSD menu will appear. When you select a video input source, the Main menu changes into the Video Menu. Function Description Brightness To adjust the overall image and background brightness level. Contrast To adjust the image brightness in relation to the background (the background is unchanged). Saturation To adjust the color's saturation of a parameter, such as light and shade control of preference display colors. Hue To adjust the color's hue of a parameter, such as vivid colors control of preference display colors. Input Type To select Analog (A1), DVI-D (D), or S-Video (SV) input source. Lock Controls When locked, the OSD menu will not appear when pressing the Menu k...
Otros modelos de este manual:Monitores - MFCD 1218 (784.97 kb)