Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
LED is blinking but no
Is the frequency properly
Adjust the frequency properly by
images on the screen.
adjusted when checking the
referring to the video card manual
Display Timing on the menu? and Preset Timing Modes.
(The maximum frequency per
resolution may differ from product to
product.)
There are only 16
Have the Windows colors
Windows ME/2000/XP :
colors shown on the
been set properly?
Set the colors properly at the
screen.
Control Panel → Display →
The screen colors
Settings.
have changed after
changing the video
Has the video card been set
Set the video card by referring to the
card.
properly?
video card manual.
I cannot use the
Does the graphics card on
If your graphics card does not support the
2560x1600 resolution
your computer support the
2560x1600 resolution, then you can only
with the monitor.
2560x1600 resolution?
use the 1280x800 resolution with your
monitor.
To use the 2560x1600 resolution, replace
your graphics card with one that supports
that resolution.
Check the following items if there is trouble with the monitor.
1. Check if the power cord and the video cables are properly connected to the computer.
2. Check if the computer beeps more than 3 times when booting.
(If it does, ask the service center to check the main board of the computer.)
3. If you installed a new video card or if you assembled the PC, check if the installed the adapter
(video) driver.
4. Check if the scanning ratio of the video screen is set at 60 Hz +/- 2 Hz.
(Do not exceed 60 Hz when using the maximum resolution.)
5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode,
remove the Display Adapter at the "Control Panel→System→Device Administrator" and then
reboot the computer to reinstall the adapter (video) driver.
If problems repeatedly occur, contact an authorized Service Center.
Q & A
Question
Answer
How can I change the
The frequency can be changed by reconfiguring the video card.
frequency?
Note that video card support can vary, depending on the version
of the driver used. (Refer to the computer or the video card
manual for details.)
How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Control
Panel→Display→Settings.
* Contact the video card manufacturer for details.
How can I set the Power Saving Windows ME/XP/2000 : Set the function at BIOS-SETUP of the
function?
computer or the screen saver. (Refer to Windows/Computer
Manual).
How can I clean the outer
Disconnect the power cord and then clean the monitor with a soft
case/LCD Panel?
cloth, using either a cleaning solution or plain water.
Do not leave any detergent or scratches on the case. Do not let
any water enter the monitor.