Votos - 0, Puntuación media: 0 ( )

Fabricar: BenQ Tamaño del archivo: 168.83 kb Nombre del archivo: Idioma del manual:

Adjusting the screen resolution
Due to the nature of liquid crystal display (LCD) technology, the picture resolution is always
fixed. For the best display performance, please set the display to its maximum resolution that is
the same with the monitor aspect ratio. This is called “Native Resolution” or maximal resolution
– that is, the clearest picture. Please refer to the table below for the native resolution of your
LCD. Lower resolutions are displayed on a full screen through an interpolation circuit. Image
blurring across pixel boundaries can occur with the interpolated resolution depending upon the
image type and its initial resolution.
Panel type
Display size
Aspect ratio
Native Resolution
17" / 19"
5:4
1280 x 1024
15.6" / 18.5"
16:9
1366 x 768
19"
16:10
1440 x 900
TN panel
20"
16:9
1600 x 900
22"
16:10
1680 x 1050
21.5" / 24" / 27"
16:9
1920 x 1080
21.5" / 24" / 27"
16:9
1920 x 1080
VA panel
32"
16:9
2560 x 1440
23" / 23.8"
16:9
1920 x 1080
23.6"
16:9
3840 x 2160
23.8"
16:9
2560 x 1440
IPS panel
24"
16:10
1920 x 1200
27"
16:9
2560 x 1440
27" / 32"
16:9
3840 x 2160
To find out the monitor aspect ratio of the purchased model, please check the Specification document on the
provided CD.
• To take full advantage of LCD technology you should select the native resolution setting of your PC screen as
described below. Be aware that not all PC video cards provide this resolution value. If yours doesn't, check
with the video card manufacturer's website for an updated driver for your particular model PC video card
which supports this resolution. Software video drivers are often updated and available for new hardware video
resolutions. If necessary, you may need to replace and update the PC video card hardware to be able to
support the native resolution of the monitor.
• Depending on the operating system on your PC, different procedures should be followed to adjust the screen
resolution. Refer to the help document of your operating system for details.
1. Open Display Properties and select the Settings tab.
You can open Display Properties by right-clicking on the Windows desktop and selecting
Properties from the pop-up menu.
2. Use the slider in the ‘Screen area’ section to adjust the screen resolution.
Select the recommended resolution (maximum resolution) then click Apply.
If you select some other resolution, be aware that this other resolution is interpolated and may not accurately
display the screen image as well as it could do at the native resolution setting.
3. Click OK then Yes.
Adjusting the screen resolution
1

Descargar ahora

Introduzca dos números de la imagen: