In the interest of safety, the EX50 should never be installed where it will be visible, directly or indirectly, by the operator of the motor vehicle. Warnings • Do not use any solvents or cleaning materials when cleaning the video Monitor. • Do not use any abrasive cleaners, they may scratch the screen. Use only a lightly dampened lint free cloth to wipe the screen if it is dirty. • Before putting on headphones always adjust the volume setting to the lowest position. • Do not put pressure on the

Table of Content 1. Table of Content Page.1 2. Introduction A) Overview Page.2 B) Features Page.2 C) Dimension Diagrams Page.3-5 D) Technical Specifications Page.6 3. Installation A) Package Contents Page.7 B) Caution to the user Page.7 C) Cleaning Page.7 D) Precautions Page.8-9 4. Using the System A) Product Views Page.10-12 B) I/O Outlet Page.13 C) Installation Procedures Page.14 D) Setup Touchscreen (Optional) Page.15 i) For Windows Page.15 ii) For DOS Page.16-18 E) OSD Switch Page.19 F) OSD

RECALL Resets the control functions back to the original factory preset values. In order for the Recall function to work, the timing must fall under one of the factory preset timing modes. SHARPNESS Adjusts the video quality to be sharp or blurry (special for text mode). COLOR TEMPERATURE Adjusts color temperature to PRESET 1 (9300 color temperature) or PRESET 2 (6500 color temperature). Or, for a custom color mode, select USER and push the select button to activate the RGB submenu. This adjusts

• Use a power cable that is properly grounded. Always use the appropriate AC cord certified for the individual country. Some examples are listed below: USA UL Switzerland SEV Canada CSA Britain BASE/BS Germany VDE Japan Electric Appliance Control Act 5. Connect the power cable to the AC/DC supply. Connect the other end to the appropriate AC outlet. Figure 12. Connecting the M170 Cables to your Computer 65-2223 You should be sure all cable connections are secure -- tighten all cable screws. Shaki

Be sure that all wiring is protected from sharp edges and is routed in such a manner that pinched when all components and interior trim are fully installed. Be sure to leave enough slack in the wiring at each component to allow working room. 6) Remove all A/V system components from their packaging and place them loosely in the vehicle at their respective locations. 7) Connect all components together (electrically) and verify proper operation of all system functions. Note: This is best done BEFOR

Multimedia Features The M150 FPD monitor comes with multimedia features built-in. It has a microphone and speakers built into the back of the display bezel and includes multimedia cables. These cables can be connected from either the rear of the monitor or in front -- two separate sets of jacks are included. Figure 5 Multimedia Cables Optional Card Reader Bracket The M150 FPD monitor is available with an optional card reader bracket (and (2) M3 screws) that supports IDTech and MagTech brand elec

An LCD panel or video monitor used for television reception, video or DVD play that operates when the vehicle is in gear or when the parking brake is not applied must be installed to the rear of the driver’s seat where it will not be visible, directly or indirectly, to the operator of the motor vehicle. Notice: This Product incorporates copyright protection technology that is protected by method claims of certain U.S. Patents and other intellectual property rights owned by Macrovision Corporatio

The remote control will operate the VOH703, Audiovox Televisions and Video Cassette Players. It is not a universal remote control and will not control equipment from other manufacturers. If a universal remote control is to be used with the VOH703, choose the remote encoding scheme for Audiovox Televisions when programming the remote. REMOTE CONTROL OPERATION TV/VIDEO MUTE CH VOL 5 6 8 9 PICTURE 2 3 CH WRITE ERASE/ AUTO PROGRAM PAUSE PLAY STOP 1-- SELECT VOL 4 7 1 SKIP/ SEARCH REW 0 FFWD R 1 2 9

3M Touch Systems Proprietary Information CHAPTER 3 Video Display Options This chapter provides guidelines for adjusting the video display and using the monitor controls to adjust the image to your liking. Before you make any adjustments: • Be sure to adjust the controls in your normal lighting conditions. • Display a test image or pattern whenever you adjust the video. Adjusting the M150 Video Display Your M150 FPD monitor has four controls to adjust the video display. • MENU . Shows or hides th