and press .Enter.I key. Then press ! or " key to select .Phase. and also press .Enter. key again. Now, press ! orI " to adjust the monitor untill the noise disappears+ To make sure the .iKey. function performs well, you have to use one of the supported modes. IfI the .iKeyi does not work properly and the .NON PRESET MODE. message is on the OSD, itI means you are not using one of the supported modes. Please set your computer to use one of theI supported modes. You will find a list of supported mo

Patent and Trademark Office. First Edition September 2001 254875-371 WHJ Keyboard & Mouse Mouse Keyboard Monitor ► ••••••••••• ¥/•*•* VmV ••••« ••••• • •••*; »or •W/WW-, © Or WARNING Power and Voltage Voltage is preset to the correct rating. If in doubt, contact your local Power Utility. Power © Modem

All other product names mentioned herein may be trademarks of their respective companies. Compaq Computer Corporation shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. The information in this document is provided “as is” without warranty of any kind, including, but not limited to, the implied warranties of merchantability and fitness for a particul

Evite las areas calientes: El producto deberia colocarse lejos de las fuentes de calor, tales como los radiadores, estufas u otros productos (incluyendo los amplificadores) que generan calor. Guia del usuario Evite las areas humedas: Nunca use el producto en un sitio humedo. Evite empujar objetos en el producto: Nunca empuje objetos de ninguna clase a traves de las ranuras del gabinete u otras aberturas en el producto. Las ranuras y aberturas se proporcionan como puntos de ventilacion. Estas abe

11 The following screen messages appear: Task started. Creating the device file... Mounting file system... Modifying “/etc/checklist”... Task completed. Click on OK. Now you can access the CD-ROM disc as you would any other mounted file system. Using Your CD-ROM Drive Mounting and Unmounting a CD-ROM Disc Unmounting a CD-ROM Disc Using SAM Use the following procedure to unmount a CD-ROM disc: NOTICE: Before you unmount a CD-ROM disc, make sure that your working directory (the directory in which

To prevent such damage from occurring, observe the following precautions during board unpacking and installation: • Stand on a static-free mat. • Wear a static strap to ensure that any accumulated electrostatic charge is discharged from your body to ground. • Connect all equipment together, including the static-free mat, static strap, routing nodes, and peripheral units. • Keep uninstalled printed circuit boards in their protective antistatic bags. • Handle printed circuit boards by their edges,

In this sample the memory module in memory slot 1A is missing. MEMORY INFORMATION WARNING: Memory has been reconfigured due to a physical change or because the Page Deallocation Table (PDT) was cleared. This is for information only. No action is required. MEMORY STATUS TABLE Slot Size(a+b) Status ------------------0a/ b 64MB Configured 1a/b ??MB SIMM not seated properly. 2a/b 128MB Configured --------TOTAL 192MB DETAILED MEMORY CONFIGURATION TABLE SPA GROUP SMC SMC Status Bank Bank Status Size S

Use of other cables can result in significant problems with system operation. The narrow, singled-ended SCSI implemented on C160/C180/C200/C240/ C360 workstations limits the total cable length of narrow SE SCSI cables to 6 meters (19.6 feet). The fast, wide, differential SCSI definition limits the total cable length of FW SCSI cables to 25 meters (82 feet). The ultra, wide single-ended SCSI definition limits the total cable length of ultra, wide-SE SCSI cables to 3 meters (9.84 feet). Always use

A4200-90050 Edition E1298 Printed in U.S.A. Copyright a Hewlett-Packard Co. 1998 Printing History First Printing: December 1998 UNIX is a registered trademark in the United States and other countries, licensed exclusively through X/Open Company Limited. NOTICE The information contained in this document is subject to change without notice. HEWLETT-PACKARD WARRANTY STATEMENT HP PRODUCT DURATION OF WARRANTY C160/C180/C200/C240/C360 one year 1. HP warrants HP hardware, accessories and supplies again

AC power input jack 2. DVI-D input socket (Analog-only models do not have the DVI-D input socket) 3. D-Sub input socket Getting to know your monitor 3. How to assemble your monitor hardware If the computer is turned on you must turn it off before continuing. Do not plug-in or turn-on the power to the monitor until instructed to do so. 1. Attach the monitor base. Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the gl