Votos - 0, Puntuación media: 5
(
)
)
|
Resumen del manual
transmitter ..................... 1 pc. (N1DAAAA00001) (N2QAHB000056) Batteries for remote control .......................... 2 pcs. Batteries The remote control Use R6/LR6, AA, UM-3 • Insert so the poles (+ and –) match those in the remote control. • Do not use rechargeable type batteries. Do not: • mix old and new batteries. • use different types at the same time. • heat or expose to flame. • take apart or short-circuit. • attempt to recharge alkaline or manganese batteries. • use batteries if the covering has been peeled off. • keep together with metallic objects such as necklaces. Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire. If electrolyte leaks from the batteries, consult your dealer. Wash thoroughly with water if electrolyte comes in contact with any part of your body. Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place. Replace if the unit does not respond to the remote control even when held close to the front panel. 30°30° Transmission window About 7 meters in front of the signal sensor Remote control signal sensor Aim at the sensor, avoiding obstacles, at a maximum range of 7 meters directly in front of the unit. • Keep the transmission window and the unit’s sensor free from dust. • Operation can be affected by strong light sources, such as direct sunlight, and the glass doors on cabinets. Do not: • put heavy objects on the remote control. • take the remote control apart. • spill liquids onto the remote control. RQT7834 RQT7834 4 (R) (L) 4 AC power supply cord Note The included AC power supply cord is for use with this unit only. Do not use it with other equipment. For your reference To save power when the unit is not going to be used for a long time, unplug it from the household AC outlet. You will need to reset some memory items after plugging in the unit. 2 AM loop antenna Stand the antenna up on its base. 1 2 1 FM indoor antenna Affix where reception is best. 1 2 Adhesive tape Set-up Connect the AC power supply cord only after all other connections have been made. Optional antenna connections (A page 10). Preparation Twist and pull off the vinyl tip of the antenna wires and speaker cords. Connection 3 Speakers Placement Place the front speakers so that the super tweeter is on the inside. Note • Keep your speakers at least 10 mm (13/32.) away from the system for proper ventilation. • These speakers do not have magnetic shielding. Do not place them near televisions, personal computers or other devices easily influenced by magnetism. • You cannot take the front net off the speakers. Front speaker (right) Super tweeter Place on the floor or a sturdy shelf so that it won’t cause vibration. Connect the left (L) side in the same way. Blue (–) Gray (+) Red (+) (SB-WAK630) Subwoofer Red Gray Red Black Blue Black (–) Black Red (+) Black (–) Super tweeter Main unit Front speaker (left) Subwoofer Use only the supplied speakers. The combination of the main unit and speakers provide the best sound. Using other speakers can damage the unit and sound quality will be negatively affected. Notes on speaker use • You can damage your speakers and shorten their useful life if you play sound at high levels over extended periods. • Reduce the volume in the following cases to avoid damage. – When playing distorted sound. – When adjusting the sound quality. Caution • Use the speakers only with the recommended system. Failure to do so may lead to damage to the amplifier and/or the speakers, and may result in the risk of fire. Consult a qualified service person if damage has occurred or if you experience a sudden change in performance. • Do not attach these speakers to walls or ceilings. Turning the demo function on/off When the unit is first plugged in, a demonstration of its functions may be shown on the display. If the demo setting is off, you can show a demonstration by selecting “DEMO ON”. Press and hold [DISP, –DEMO]. The display changes each time the button is held down. NO DEMO (off) DEMO ON (on) While in the standby mode, select “NO DEMO” to reduce power consumption. Note DEMO function cannot be turned on when Dimmer is on. DISP, –DEMO Front panel controls 1Display 2AC supply indicator [AC IN] This indicator lights when the unit is connected to the AC power supply. 3Standby/on switch [fffff/I, POWER] Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. 4H.BASS button [H.BASS] .................................................... 13 5Subwoofer button [SUBWOOFER] ..................................... 13 6Deck 1 cassette holder .........................................................11 7Disc tray 8Remote control signal sensor ............................................... 3 9CD tray open/close button [c, OPEN/CLOSE] .................... 6 !CD direct play buttons [1 – 5] ........................................