Votos - 5, Puntuación media: 4
(
)
)
|
Resumen del manual
When you have finished selecting the tracks, press CD ( ) to start listening to the selection, in the order in which the tracks were programmed. Press Stop ( ) twice to cancel the selection when the disc is playing. CD CD CD VOL. VOL. Tuning Mode TAPE EQ Preset Power Sound Sleep CD Repeat Mono/ST. TUNER Band Program /Set AUX 1 2 3 4 6 1 2 TAPE Sleep CD Repeat Mono/ST. TUNER Band CD 1 2,3,4 1 12 3 4 5 6 7 PROGRAM PROGRAM 2,4 1,7 3 3 6 Regarding the playback of CD-R/RW In the case of an original CD-R(Recordable) recorded in audio CD format, CD-RW(Rewritable) and editing by the user, playback is processed on the respective completed status. (The player may not be played back according to the characteristics of the CD or recorded status.) The CD-RW is comparably less reflexive than CD which causes more time delay to read. GB 13 B 12 You can check and change your selection of tracks at any time. You must have selected at least one track. Press Stop ( ) once if you have started listening to the selection. Press Program/Set. Each time you press Program/Set, the next selection is displayed. Press Program/Set one or more times until the track to be changed is displayed. Press or to select the new track. Press Program/Set. Press CD ( ) to start listening to the selection. Result: The first track selected is played. You can change one or more tracks in your initial selection. You can store up to: 15 FM stations 8 MW station(OPTION) 7 LW station(OPTION) 5 MW station(OPTION) 5 SW1 station(OPTION) 5 SW2 station(OPTION) Switch the system on by pressing On/Standby ( ). Select the TUNER function by pressing TUNER/Band on the front panel. Select the required frequency band by pressing TUNER/Band again. Result:The appropriate indication is displayed: FM Frequency Modulation AM(MW) Medium Wave LW(Option) Long Wave SW1,SW2(Option) Short Wave Press Tuning Mode one or more times until MANUAL is displayed. Automatic tuning Press and hold or on the remote control. Press and hold , on the main unit. Result: Automatically scans and tunes to the next available station. Manual tuning Press or on the remote control. Press or on the main unit. Result: Press the button repeatedly to tune in the desired station manually. PRESET function is explained in detail in the section “Selecting a Stored Station” on. Select the station to be stored by pressing , to increase or decrease the frequency respectively. To scroll through the frequencies faster when searching manually, hold down the , . The automatic search procedure may stop on a frequency that does not correspond to a radio station. If this happens, use the manual search mode. Checking and Changing Programmed Tracks On/Standby Timer On/Off TAPE EQ Preset Power Sound Sleep CD Repeat Mono/ST. TUNER Band Program /Set AUX Timer/ Clock CD CD CD VOL. VOL. Tuning Mode Searching for and Storing the Radio Stations 1 6 EQ Down Mute Counter Reset Repeat A B Tuning Mode REC/Pause CD Sync. Up S.Bass Volume Power Sound CD AUX TUNER TAPE Band 1 15 AM stations(option) 15 AM stations(option) If you do not want to store the radio station found, revert to Step 4 and search for another station. Otherwise: a Press Program/Set. Result: The program number is displayed for a few seconds. b Press Tuning and to assign a program number between 1 and 15. c Press Program/Set to store the radio station. Result: The program number is no longer displayed and the station is stored. To store any other radio frequencies required, repeat Steps 3 to 6. The PROGRAM function can be used to assign a new station to an existing program number. You can listen to a stored radio station as follows: Switch the system on by pressing On/Standby ( ). Select the TUNER function by pressing TUNER/Band on the front panel. Select the required frequency band by pressing TUNER/Band. Select the radio station as follows. To listen to ... Press ... A stored station a Press the Tuning Mode button until “PRESET” is displayed. b Tuning and to select the required station. Press Tuning Mode again to exit the stored station selection function. You can improve the quality of radio reception by: Rotating the FM or AM(MW) aerial Testing the positions of the FM and AM(MW) aerials before fixing them permanently If reception from a specific FM radio station is poor, press Mono/ST to switch from stereo mode to mono. The quality of the sound will be improved. Selecting a Stored Station Improving Radio Reception Searching for and Storing the Radio Stations(continued) TAPE EQ Preset Power Sound Sleep CD Repeat Mono/ST. TUNER Band Program /Set AUX TAPE EQ Preset Power Sound Sleep CD Repeat Mono/ST. TUNER Band Program /Set AUX CD CD CD VOL. VOL. Tuning Mode 6 EQ Down Mute Counter Reset Repeat A B Tuning Mode REC/Pause CD Sync. Up S.Bass Volume Power Sound CD AUX TUNER TAPE Band 2,3,5 12 3 456 4 4 123 4 5 2,3 4,5 4 6 7 6 6 6 6 1234 CD CD VOL. VOL. Tuning Mode On/Standby Timer On/Off EQ Preset Power Sound Sleep CD Repeat Mono/ST. TUNER B d Program /Set AUX Timer/ Clo...