Votos - 1, Puntuación media: 4
(
)
)
|
Fotos y especificaciones LG HTK805TH |
Resumen del manual
You can hear the sound through the system’s speakers. Installation 3 NOTE • Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use only one of the connections described in this manual. • Please refer to the manuals of your TV, Stereo System or other devices as necessary to make the best connections. • Make sure the unit is connected directly to the TV. Tune the TV to the correct video input channel. • Do not connect your unit via your VCR. The image could be distorted by the copy protection system. Component Connection Unit TV Green Blue Red HTK805TH-FK_DRUSLL_ENG_6932.indd16 16 2010-02-22 .AEA 6:27:14 Installation 1 HDMI Out Connection If you have a HDMI TV or monitor, you can connect it to this unit using a HDMI cable. Connect the HDMI OUT jack on the unit to the HDMI IN jack on a HDMI compatible TV or monitor. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). HDMI Connection Unit TV TIP • You can fully enjoy digital audio and video signals together with this HDMI connection. • When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 19.) NOTE • If a connected HDMI device does not accept the audio output of the unit, the HDMI device ’s audio sound may be distorted or may not output. • When you connect a HDMI or DVI compatible device make sure of the following: -Try switching off the HDMI/DVI device and this unit. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this unit. -The connected device’s video input is set correctly for this unit. -The connected device is compatible with 720x480i (or 576i), 720x480p (or 576p), 1280x720p,1920x1080i or 1920x1080p video input. • Not all HDCP-compatible HDMI or DVI devices will work with this unit. -The picture will not be displayed properly with non-HDCP device. -This unit does not playback and TV screen is changed to black or green screen or the snow noise may occur on the screen. • If there is noise or lines on the screen, please check the HDMI cable and usea higher version cable than 1.2A HDMI cable. CAUTION • Changing the resolution when the connection has already been established may result in malfunctions. To solve the problem, turn off the unit and then turn it on again. • When the HDMI connection with HDCP is not verified, TV screen is changed to black or green screen or the snow noise may occur on the screen. In this case, check the the HDMI connection, or disconnect the HDMI cable. 3 Installation HTK805TH-FK_DRUSLL_ENG_6932.indd17 17 2010-02-22 .AEA 6:27:15 1 Installation Video Connection Connect the VIDEO OUT jack on the unit to the video in jack on the TV using a video cable. You can hear the sound through the system’s speakers. Installation 3 Video Connection Unit TV Yellow HTK805TH-FK_DRUSLL_ENG_6932.indd18 18 2010-02-22 .AEA 6:27:15 Installation 1 Resolution Setting The unit provides several output resolutions for HDMI OUT and COMPONENT VIDEO OUT jacks. You can change the resolution using [Setup] menu. 1. Press HOME. 2. Use I/i to select the [Setup] and press • ENTER. The [Setup] menu appears. 3. Use U/u to select [Display] option then press i to move to the second level. 4. Use U/u to select the [Resolution] option then press i to move to the third level. 5. Use U/u to select the desired resolution then press • ENTER to confirm your selection. NOTE If your TV does not accept the resolution you have set on the player, you can set resolution to 480p (or 576p) as follows: Press x (STOP) for more than 5 seconds. Video Output Resolution Displayed resolution in display window and outputted resolution may different according to connection type. [HDMI OUT]: 1080p, 1080i, 720p and 480p (or 576p) and 480i (or 576i) [COMPONENT VIDEO OUT]: 480p (or 576p) and 480i (or 576i) [VIDEO OUT]: 480i (or 576i) 3 Installation HTK805TH-FK_DRUSLL_ENG_6932.indd19 19 2010-02-22 .AEA 6:27:15 0 Installation Optional Equipment Connection AUX In Connection Connect an Output of auxiliary device to the AUX (L/R) INPUT Connector. Installation 3 AUX In Connection Unit Red White To the audio output jacks of your component (TV, VCR, etc.) NOTE If your TV has only one output for audio (mono), connect it to the left (white) audio jack on the unit. AUDIO (PORT. IN) In Connection Connect an output of portable device (MP3 or PMP etc) to the AUDIO (PORT. IN) input connector. PORT.IN Connection MP3 player, etc... Listening to music from your portable player or external device The unit can be used to play the music from many types of portable player or external devices. 1. Connect the portable player to the PORT.IN(PORTABLE IN) connector of the unit. Or Connect the external device to the AUX connector of the unit. 2. Turn the power on by pressing 1(POWER). 3. Select the PORTABLE or AUX (L/R) INPUT function by pressing t RADIO&INPUT. 4. Turn on the portable player or external device and start it playing. HTK805TH-FK_DRUSLL_ENG...