Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,487,535 & other U.S. and worldwide patents issued & pending. DTS and DTS Digital Surround are registered trademarks and the DTS logos and Symbol are trademarks of DTS, Inc. © 1996-2007 DTS, Inc. All Rights Reserved. The making of unauthorized copies of copy-protected material, including computer programs, files, broadcasts and sound recordings, may be an infringement of copyrights and constitute a criminal offence. This equipment should not be used for such purposes. Be responsible respect copyrights 3 4 TV Connection Make one of the following connections, depending on the capabilities of your existing equipment. Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution: Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to the TV via your VCR. The DVD image could be distorted by the copy protection system. SCART connection Connect the EURO AV OUTPUT (TO TV) socket on the DVD/CD Receiver to the corresponding jacks on the TV using the scart cable (T). Component Video connection Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding jacks on the TV using a Y PB PR cable (C). If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/CD Receiver’s progressive scan output for higher video resolution. If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owner’s manual for TV then set the resolution that your TV can accept. Composit Video connection Connect the MONITOR jack from the DVD/CD Receiver to the Video IN jack on the TV using the video cable supplied (V). Antenna Connection Connect the supplied FM/AM antenna for listening to the radio. Connect the AM Loop aerial to the AM aerial connector. Connect the FM Wire aerial to the FM aerial connector. Notes: To prevent noise pickup, keep the AM Loop aerial away from the DVD/CD Receiver and other components. Be sure to fully extend the FM wire aerial. After connecting the FM Wire aerial, keep it as horizontal as possible. Speaker System Connection Connect the speaker wires the speaker terminals. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: Be sure to match the speaker wires to the appropriate terminal on the components, + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers. Optional Equipment Connection Connect a VCR to the AUX IN connectors. Installation Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Be careful of the following Be careful to make sure children not to put their hands or any objects into the *speaker duct. *Speaker duct: A hall for plentiful bass sound on speaker cabinet(enclosure). Operation 1 2 3 45678 131210 13 12 1 1111 109 Operate using the Front Panel 1. ( /[)POWER button Lights red when the receiver is in Standby mode (off) 2. DISC Tray 3. DISPLAY Window 4. Remote Sensor:RemoteControl Operation Range Distance: About 23 ft (7 m) from the front of the Remote Sensor Angle: About 30° in each direction in front of the Remote Sensor 5. OPEN/CLOSE Opens and closes the disc tray. 6. • (B/X)PLAY/PAUSE • FUNC.(-) Press and hold down this button about 3 seconds, then press repeatedly to select other function. (DVD/CD > >>USB > >> AUX> >> TV -AUDIO > >>PORTABLE> >>FM > >>AM) 7.VSM Press VSM to set the VIRTUAL sound. • 3D STEREO Realtime 3D positioned sound rendering technology with stereo sources, optimized for stereo speakers. Listeners may experience amazing virtual surround effects with their own multimedia players. • Multichannel sound The Multichannel sound changes the sound in 5.1 ch into a virtual one in the 10.1 ch so that it provides such a feeling that you listen to the sound simultaneously from the right and left speakers and center speaker. 8. TUNING(-/+)/SKIP/SCAN(. ../> >>) For manual tuning, press TUNING (-/+) repeatedly. For automatic tuning, press and hold TUNING (-/+) for about two seconds on the front panel. 9. VOLUME controller Adjusts speaker volume. 10. MIC 1/MIC 2 Connect a microphone to MIC 1 or MIC 2 or to both sockets.( 6.3mm) -If you connect a MIC into the unit during play the DTS source , sound output will be decrease. -MIC function support in DVD/CD or USB mode. -MIC connecting state,sound is outputted to all channel speakers. -When you play a DivX file, voice of Micr...