Votos - 3, Puntuación media: 4
(
)
)
|
Fotos y especificaciones LG LPC-140X |
Resumen del manual
Note Unplug the AC power cord from the wall outlet if you do not to use for an extended period of time. Adjusting the voltage (OPTIONAL) If your unit is equipped with a voltage selector at the back side, be sure to set it to your local power supplied before connecting the AC power cord. 1 1 Battery Installation Press and open the battery cover. 2 2 Put six “C”(R14) batteries (not supplied) into the compartment making sure the + and - are correctly positioned. 3 3 Replace the battery cover. Note • To avoid damage from possible battery leakage, remove the batteries if you do not plan to use the unit for an extended period of time. • When the batteries are weak, replace all the batteries with new ones. • During the AC power cord connect to the wall outlet, the batteries are not worn out. Audio Adjustment Volume Adjustment Turn VOLUME CONTROL DIAL clockwise to increase the sound level, or counterclockwise to decrease it. Headphone Socket • Connect a stereo headphone plug ( 3.5mm) into the headphone jack. • The speakers are automatically disconnected when you plug in the headphones (not supplied). BEFORE OPERATION 7 Radio Operation FUNCTION SWITCH TUNING dial RIF/FM MODE SWITCH (ST./MONO) Tape Operation • TAPE PAUSE (X) • TAPE STOP/EJECT (xZ) • FAST FORWARD (m) • REWIND (M) • TAPE PLAY (b) • TAPE RECORD (z) 1 11 Listening to the radio Set FUNCTION SWITCH to select AM or FM. 2 2 Set a station by turning TUNING dial. To turn off the radio Set FUNCTION SWITCH to TAPE(OFF) or CD to turn off your unit. 1 1 Setting STEREO/ MONO Set RIF/ FM MODE SWITCH to ST. to listening to an FM stereobroadcast. 2 2 Set RIF/ FM MODE SWITCH to MONO when listening to an FM stereo broadcast. Selecting this function will substantially reduce the noise, however the stereo effect will be lost. Notes Adjust the antenna to get more clear reception. • AM antenna This antenna is built within the unit and rotate the unit for better reception. • FM antenna Pull the telescopic antenna out and adjust the angle and direction for better reception. 1 1 Basic Playback Set FUNCTION SWITCH to TAPE. 2 2 Open the cassette door by pressing TAPE STOP/EJECT (xZ) button. 3 3 Insert a cassette and push close the TAPE door. 4 4 Press TAPE PLAY (b) to playback. To Pause Play Press TAPE PAUSE (X) button to pause. Press the button again to resume play. To Stop Play Press TAPE STOP/EJECT (xZ) button to stop play. (Your cassette deck will automatically stop at the end of the tape.) To Play Rewind or Fast Forward After pressing and holding FAST FORWARD/REWIND (m/M) button during playback, press TAPE PLAY (b) at the point you want. 8 CD Operation n OPERATION FUNCTION SWITCH CD DOOR OPEN (ZOPEN) • CD BACKWARD SKIP/SEARCH (.) • CD FORWARD SKIP/SEARCH (>) • +10 • CD REPEAT • CD STOP (x) • CD PLAY/PAUSE (u) 1 1 Basic Playback Set FUNCTION SWITCH to CD. 2 2 Press CD DOOR OPEN (ZOPEN) button to open the disc compartment. 3 3 Load a disc with the printed side facing up. 4 4 Close the disc compartment. The display will show the total number of tracks. 5 5 Press CD PLAY/PAUSE (u) button to begin play. The track number will be shown in the display. To Pause Play Press CD PLAY/PAUSE (u) button to pause during playback. Press CD PLAY/PAUSE (u) button again to resume play. To Stop Play Press CD STOP (x) button during playback. To Skipping the Track • Press CD FORWARD SKIP/SEARCH (>) button to go to the next track. • When CD BACKWARD SKIP/SEARCH (.) button is pressed once midway through a track, the player returns to the start of that track. When it is pressed again, a track is skipped each time the button is pressed. To Searching the Track (CD Only) After pressing and holding CD SKIP/SEARCH (.,>) button during playback, then release at the point you want. Notes • Do not tilt or move your unit with discs loaded. If you do you may damage the discs and your unit. • Do not touch the playing side of CD; the side without any printing on it. • Clean your CD from the middle outward with a soft lint free cloth. • Playable number of music including folders and files is 512 musics. • Playable number of music per folder is 255 musics. To Repeat Play To play one track repeatedly Press CD REPEAT button once during playback. - “REPEAT 1” appears in the display. To play all tracks repeatedly Press CD REPEAT button again during playback. - “REPEAT ALL” appears in the display. To cancel repeat play Press CD REPEAT button once more during playback. -Repeat indicator disappears. Track +10 Durning playback, press the +10 button to go forward to the next 10th track. 9 Recording Wind the tape to the point recording starts. (Use only normal tapes.) Basic Recording 2 2 Select a function you wish to record by setting1 FUNCTION SWITCH except TAPE function. Insert a blank tape. 3 3 Press RECORD (z) button. TAPE PLAY (b) button is pressed automatically. 4 4 Start playing your CD or RADIO. CD Synchronized Recording This feature automatically records an entire CD into a cassette. 1 1 Load a CD disc and Set FUNC...