Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
Component Video connection Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding jacks on the TV using an Y PB PR cable (C). SCART connection Connect the EURO AV OUTPUT (TO TV) socket on the DVD/CD Receiver to the corresponding jacks on the TV using the scart cable (T). If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/CD Receiver’s progressive scan output for the highest video resolution. If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owner’s manual for TV then set the resolution that your TV can accept. Notes: The HDMI mode must be set to OFF for VIDEO OUT and Component video connections. A picture via scart input is not supported. Caution VIDEO OUT SELECTOR switch In power-off state, select either COMPONENT VIDEO OUT (PROGRESSIVE SCAN) or SCART signal of EURO AV TO TV terminal depending on how to connect the unit to the TV. TV Connection OUT PUT INPUT L -AUX - R MONITOR Y COMPONENT VIDEO (PROGRESSIVE SCAN) Y COMPONENT VIDEO / PROGRESSIVE SCAN INPUT VIDEO INPUT SCART INPUT Installation and Setup Rear of DVD/CD Receiver Rear of TV V TC 7 Installation and Setup Make one of the following connections, depending on the capabilities of your existing equipment. Tips: Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD/CD Receiver. Use one of the connections described below. Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections. Caution: Make sure the DVD/CD Receiver is connected directly to the TV. Select the correct AV input on your TV. Do not connect your DVD/CD Receiver to TV via your VCR. The DVD image could be distorted by the copy protection system. Video connection Connect the MONITOR OUT jack from the DVD/CD Receiver to the VIDEO IN jack on the TV using the video cable (V). Component Video connection Connect the COMPONENT VIDEO OUT jacks from the DVD/CD Receiver to the corresponding jacks on the TV using an Y PB PR cable (C). SCART connection Connect the EURO AV OUTPUT (TO TV) socket on the DVD/CD Receiver to the corresponding jacks on the TV using the scart cable (T). If your television is a high-definition or “digital ready” television, you may take advantage of the DVD/CD Receiver’s progressive scan output for the highest video resolution. If your TV does not accept your resolution setting, abnormal picture appears on the screen. Please read owner’s manual for TV then set the resolution that your TV can accept. Notes: The HDMI mode must be set to OFF for VIDEO OUT and Component video connections. A picture via scart input is not supported. Caution VIDEO OUT SELECTOR switch In power-off state, select either COMPONENT VIDEO OUT (PROGRESSIVE SCAN) or SCART signal of EURO AV TO TV terminal depending on how to connect the unit to the TV. TV Connection OUT PUT INPUT L -AUX - R MONITOR Y COMPONENT VIDEO (PROGRESSIVE SCAN) Y COMPONENT VIDEO / PROGRESSIVE SCAN INPUT VIDEO INPUT SCART INPUT Installation and Setup Rear of DVD/CD Receiver Rear of TV V TC Optional Equipment Connection VIDEO OUT IN AUDIO (L) AUDIO (R) OUT PUT INPUT L -AUX - R MONITOR Y COMPONENT VIDEO (PROGRESSIVE SCAN) OPTICAL OUT Rear of DVD/CD Receiver U O A Auxiliary deviceDVD Player (or Digital Device, etc) USB Memory, MP3 Player (or Memory Card Reader, etc.) To AUDIO OUT (L/R) To AV IN AUDIO (L/R) USB connection (U) Connect the USB port of USB Memory (or MP3 player, etc.) to the USB port on the front of the unit. Removing the USB Device from the unit 1. Choose a different function mode or press STOP (x) twice in a row. 2. Remove the USB device from the unit. Notes: • Don’t extract the USB device while operating. • Music files (MP3/WMA), image files (JPEG) and video files can be played. • This unit can not use a USB HUB. • Recommended Memory Cards. Compact Flash Card (CFC), Micro Drive (MD), Smart Media Card (SMC), Memory Stick (MS), Secure Digital Card (SD), Multi Media Card (MMC), Memory Stick Pro (MS-Pro) -Compatible with : FAT16, FAT32 -Only use the memory cards recommended. • Devices which require additional program installation when you have connected the unit to a computer are not supported. • In case of a USB HDD, make sure to connect an auxiliary power cord to the USB HDD for proper operation. Up to four primary partitions of a drive are supported. If there is an extension partition, it will not be supported. • If the drive of USB device is two or more, a drive folder is displayed on the screen. If you want to move to the initial menu after you select a folder, press RETURN. • Digital cameras and mobile phones are not supported. AUX IN connection (A) Connect a Output of auxiliary device to the AUX AUDIO Input (L/R) Connector. OPTICAL IN connection (O) Connect an optical output of DVD Player (or Digital Device etc) to the OPTICAL IN connector. AUDIO IN connection (D) Connect ...