Iniciar sesión:
Votos - 4, Puntuación media: 3.3 ( )

Manual de usuario Kenwood, modelo XD-252

Fabricar: Kenwood
Tamaño del archivo: 2.65 mb
Nombre del archivo:
Idioma del manual:en
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Units are designed for operation as follows. China ............................................ AC 220 V only Other countries ............ AC 110 / 127 / 220 / 230240 V switchable* * AC voltage selection The AC voltage selector switches on the rear panel are set to the voltage that prevails in the area to which the unit is shipped. Before con- necting the power cord to your AC outlet, make sure that the setting positions of these switches match your line voltage. If not, they must be set to your voltage in accordance with the following direction. Note: Our warranty does not cover damage caused by excessive line voltage due to improper setting of the AC voltage selector switch. AC voltage selector switches Move switch lever to match your line voltage with a small screwdriver or other pointed tool. (110V, 127V, 220V or 230V - 240V AC) 230V I 240V THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS IN- TENDED TO ALERT THE USER TOTHE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The marking of products using lasers (Except for some areas) The marking is located on the rear panel and says this product has been classified as Class 1. It means that there is no danger of hazard- ous radiation outside the product CLASS 1 LASER PRODUCT SAFETY PRECAUTIONS WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOTEXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN 2 EN CONTENTS Page BEFORE APPLYING POWER.......................... 2 SAFETY PRECAUTIONS ................................. 2 ACCESSORIES .................................................... 3 HANDLING OF DISCS AND TAPES ..................... 4 NAMES OF CONTROLS AND INDICATORS .... 5 - 7 PREPARATION FOR USE..............................8 - 10 SETTING THE CLOCK .................................. 11 -12 CHANNEL SPACE SETTING .............................. 12 SOUND CONTROL ........................................... 13 COMPACT DISC OPERATION.....................14 - 18 RADIO OPERATION ................................... 19 - 21 TYPES OF DISCS WHICH CAN BE PLAYED ..... 22 BEFORE USING VIDEO CD............................... 23 VIDEO CD OPERATION (During PBC on mode) ............................... 24 - 25 ACCESSORIES Page VIDEO CD OPERATION (During PBC off mode) ............................... 26 - 34 KARAOKE PLAYBACK ................................ 35 - 36 MP3 OPERATION ...................................... 37 - 38 CASSETTE OPERATION.................................... 39 RECORDING (TAPE B only)........................ 40 - 42 HOW TO USE THE BUILT-IN TIMER............ 43 - 45 USING EXTERNAL UNITS ................................. 46 RESETTING THE MICROCOMPUTER ............... 47 TRANSPORTING THE UNIT............................... 47 MAINTENANCE ................................................ 48 IN CASE OF DIFFICULTY ........................... 49 - 51 DISPLAY MESSAGE LIST .................................. 51 SPECIFICATIONS ....................................... 52 - 54 FM Antenna AM Loop Antenna Remote Control “AA” size battery (UM/ (1) (1) (1) SUM-3, R6, HP-7 or similar) (2) Use to adapt the plug on the power cord to the shape of the wall outlet. (Accessory only for regions where use is necessary.) AC Plug Adaptor (1) Video Cable (1) 3 EN HANDLING OF DISCS AND TAPES Disc handling precautions Handling Hold the discs so that you do not touch the playing surface. Do not attach paper or tape to ei- ther the playing side or the label side of the discs. Cleaning If fingerprints or foreign matter become attached to the disc, lightly wipe the disc with a soft cotton cloth (or similar) from the center of the disc outwards in a radial manner. Storage When a disc is not to be played for a long period of time, remove it from the player and store it in its case. Sticker Sticky paste Label side Playing side Discs which can be played with this unit CD (12 cm, 8 cm), VCD and the audio part of CD-G, CD-EG and CD-EXTRA. Use discs that comply with the IEC standard, for example a disc carrying the marking on the label surface. Never play a cracked or warped disc During playback, the disc rotates at high speed in the player. Therefore, to avoid danger, never use a cracked or deformed disc or a disc repaired with tape or adhesive agent. Please do not use discs which are not round because they may cause a malfunction. Disc accessories The disc accessories (stabilizer, protection sheet, protection ring, etc.) which are marketed for improv- ing the soun...

Otros modelos de este manual:
estéreo - XD-V555 (2.65 mb)
estéreo - XD-V757 (2.65 mb)
estéreo - XD-V858 (2.65 mb)

Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría