Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
2 Press the CD button and load the desired disc. • Use the program playback function to store the tracks you want to record in memory. (see page 18) 3 Load a cassette into the TAPE B cassette compartment. 4 Press the REC PAUSE button. • “SYNC.” and “¶ 2 3” will flash. 5 Press the 2 or 3 button. • “SYNC.” will disappear and “¶ 2 or ¶ 3” will light up. • CD playback will start approximately 5 seconds after the tape starts To stop recording Press the 7 STOP button. The CD and tape will stop. 5 2 4 3 1 7 STOP 2 3 4 7 STOP 31 EN Note : • When the end of the tape is reached whilst recording, the CD player will display the track number which was being played at that time, and stop automatically. If you want to restart recording from the beginning of the interrupted track, turn over the tape, press the REC PAUSE button and then the 3 button. (If tracks have been stored in memory using the program playback function, recording will restart from the first track stored in memory.) 32 EN 1 5 3 4 2 7 STOP 2 3 4 1 Selection of reverse mode : Press the REVERSE MODE button repeatedly to select the following setting : • “ ” .....Recording stops after having recorded both sides of tape. • “ ” .....Recording stops after having recorded one side of tape. Dubbing from tape to tape 1 Press the ON/STANDBY button to turn the power on. 2 Load a prerecorded cassette into the TAPE A cassette compartment. Insert a blank tape into the TAPE B cassette compartment. • It is recommended that the recording tape be the same length as the master tape. 3 Press the TAPE (A/B) button until “TAPE A” appears in the display. 4 Press the REC PAUSE button. “REC.” and “¶ 3” will flash. 5 Press the 3 button. “REC.” will disappear and “¶ 3” will light up. To stop dubbing : Press the 7 STOP button. • TAPE A and TAPE B will simultaneously stop. Erasing recorded tapes • Make sure that TAPE A is not in use. 1 Load the tape to be erased into the TAPE B cassette compartment. 2 Press the TAPE (A/B) button until “TAPE B” appears in the display. 3 Press the REC PAUSE button. “ERASE” and “¶ 2 3” will flash. 4 Press the 2 or 3 button. “ERASE” and “¶ 2 or ¶ 3” will light up. HOW TO USE THE BUILT-IN TIMER • Before setting the timer, make sure that the clock setting is correct. (page 11) Timer playback 1 Press the ON/STANDBY button to turn the power on 2 Press the CD, TUNER (BAND), TAPE (A/B) or VIDEO/AUX button to select the desired function, and then adjust the sound volume using the VOLUME CONTROL. 3 Press the TIMER button repeatedly until “ ” is displayed. 4 Press the TUNING/TIME (%UP or fiDOWN) button to set the hour start time, then press the MEMORY/SET button. 5 Press the TUNING/TIME (%UP or fiDOWN) button to set the minute start time, then press the MEMORY/SET button. • The unit will enter the standby mode automatically, and the STANDBY/TIMER indicator will light up. 6 When the preset time is reached, the timer playback will start. • The volume will increase gradually. Notes : • When performing timer playback using an external unit connected to the VIDEO/AUX socket, only the power of the main unit will be turned off automatically. (The power of the external unit will not be turned off.) • If you select CD or TAPE, the unit will enter the standby mode after the playback. If you select TUNER or VIDEO/AUX, it will enter the standby mode one hour after the timer playback starts. TUNER (BAND) CD TAPE (A/B) BAND / TUNER CD POWER TAPE (A/B) TIMER MEMORY/ SET VOLUME CONTROL TUNING/ TIME (%UP fiDOWN) VIDEO / AUX VOLUME MEMORY /SET TIMER TUNING/TIME (fi %) 4 5 ON/ STANDBY VIDEO/AUX STANDBY/TIMER 33 EN MEMORY /SET TIMER TUNING/TIME (fi %) TUNER (BAND) VIDEO / AUX POWER VOLUME 3 REC 4 REC REC 5 REC Timer recording 1 Press the ON/STANDBY button to turn the power on. • Load a cassettle for recording into the TAPE B cassette compartment. 2 Press the TUNER (BAND) or VIDEO/AUX button to select the desired function, and then adjust the sound volume using the VOLUME CONTROL. 3 Press the TIMER button repeatedly until “ REC” is displayed. 4 Press the TUNING/TIME (%UP or fiDOWN) button to set the hour start time, then press the MEMORY/SET button. 5 Press the TUNING/TIME (%UP or fiDOWN) button to set the minute start time, then press the MEMORY/SET button. • The unit will enter the standby mode automatically, and the STANDBY/TIMER indicator will light up. 6 When the preset time is reached, the timer recording will start. • The volume will increase gradually. 7 When the recording tape reaches its end, the timer recording will end, and the unit will enter the standby mode. To cancel timer operation : Press the ON/STANDBY button to turn the power on. To change the programmed contents : Start again from step 1. Note : • Once the time is set, the setting will be retained until a new time is entered. STANDBY/TIMER ON/ STANDBY VIDEO /AUX TUNER (BAND) TIMER MEMORY/ SET VOLUME CONTROL TUNING/ TIME (%UP fiDOWN) 34 EN 2 3 TIMER MEMORY/ SET TUNING/TIME (%UP fiDOWN) MEMORY /SET TIMER TUNING/TIME...
Otros modelos de este manual:estéreo - XD-355 (2.08 mb)
estéreo - XD-355E (2.08 mb)
estéreo - XD-655 (2.08 mb)