Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO PLAY1**)1:5 PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY AUTO TUNED DISC ALL STEREO CDAY1* PGM MEMO EDIT RDS EON TA NEWS INFO. TP PTY TOTAL SPACE AUTO TUNED DISC ALL STEREO M15AFM*89).) C DOWN TUNING UP 1 A ENTER AUTO M. C DOWN TUNING UP 1 A ENTER AUTO M. 3Select the input source. (1) Select the source. (2) Enter it. C DOWN TUNING UP 1 A ENTER AUTO M. TAPE MD Select the timer program No. to be used. Each press of the key switches the program numbers as follows. 1 PROG.1 ..... Execution of program 1 only. SRS 3D 2 PROG.2 ..... Execution of program 2 only. 3 PROG.1, 2 . Execution of programs 1 and 2. 4 Timer OFF . The selected program No. lights. . The timer will not function unless a program No. is selected. 68 Timer operation Adjust the clock before setting the timer. 68 Timer operation Adjust the clock before setting the timer. Ensure that the power is OFF. Check the reservation content. Select the program number to be checked. EX.BASS When timer operation is not required Press so that all PROG. indicators are OFF. SRS 3D To set the same timer program again Press so that the desired PROG. indicators lights. SRS 3D XD-8550/XD-6000 (En/T) NoteNote The reservation contents cannot be cleared. The contents are cleared only when they are changed. Each press of the key switches the program numbers as follows. PROG.1 ........Display of program 1 PROG.2 ........Display of program 2 Normal mode . The reserved contents will be displayed for 3 seconds per item. After this, the previous display content appears again. To change the reserved contents Restart the procedure of “Timer programming” from the beginning. Each press of the key switches the program numbers as follows. PROG.1 ........Program 1 operates. PROG.2 ........Program 2 operates. PROG.1, 2 .... Programs 1 and 2 operate. Not lit ..........No program operates. . The reservation contents are held in memory. Each press of the key switches the program numbers as follows. PROG.1 ........Program 1 operates. PROG.2 ........Program 2 operates. PROG.1, 2 .... Programs 1 and 2 operate. Not lit ..........No program operates. . Also prepare the disc or tape and adjust the listening volume. Application section Important Items XD-8550/XD-6000 (En/T) Maintenance Cleaning the head section There are precisely aligned parts around the heads, including the tape guides. When cleaning, pay special attention so as not to apply shock to them. NoteNote Demagnetizing the head When the recording / playback head is magnetized, the sound quality will deteriorate. In such a case, demagnetize the head using a commercially avail- able demagnetizer (head eraser). Cleaning the heads and peripheral compo- nents For maintaining the best condition of the deck and for longer service life, always keep the heads (re- cording / playback / erase), capstan and pinch roller clean. To clean them, perform the following: 1. Open the cassette holder. 2. Using a cotton swab dipped in alcohol, clean the head (recording / playback / erase), capstan and pinch roller carefully. Capstan Pinch roller Head Tape guides Cotton swab Maintenance of the set When the front panel or case becomes dirty, wipe with a soft, dry cloth. Do not use thinner, benzine, alcohol, etc. for these agents may cause discoloration. In regard to contact cleaner Do not use contact cleaners because it could cause a malfunction. Be specially careful not to use contact cleaners containing oil, for they may deform the plastic component. Reference Beware of condensation When water vapor comes into contact with the surface of a cold Be especially careful in the following conditions: material, condensation is produced. . When the unit is brought from a cold place to a warm place, and there If condensation occurs, correct operation may not be possible, or is a large temperature difference. the unit may not function correctly. . When a heater starts operating. This is not a malfunction, however, and the unit should be dried-out. . When the unit is brought from an air-conditioned place to a place of (To do this, turn the ON/STANDBY switch ON and leave the unit as it high temperature with high humidity. is for several hours.) . When there is a large difference between the internal temperature of the unit and the ambient temperature, or in conditions where condensation occurs easily. Memory backup function Stored contents which are cleared immediately when power plug is unplugged from power outlet Clock display Stored contents which are cleared in at least a day after power plug is unplugged from power outlet Amplifier POWER status (ON or OFF) Input selection Volume control value Tuner/equalizer unit Receiving band Frequency Preset stations Program timer setting contents Balance setting Equalizer’s manual memory created by the user SRS 3D level Cassette deck unit Recording level Transport direction DOLBY NR Reverse mode Knowledge sections Sound Retrieval System manufactu...
Otros modelos de este manual:estéreo - XD-6000 (3.18 mb)
estéreo - XD-6550 (3.18 mb)
estéreo - XD-8550 (3.18 mb)