Votos - 3, Puntuación media: 3
(
)
)
|
Resumen del manual
MULTI CONTROL ENTER (Password menu appears.) 2After select “Set Password”, press the ENTER key. MULTI CONTROL ENTER 3Press Cursor up/down (5/.) keys or numeric keys on the remote to enter password. 4Press ENTER key to finish password input (Confirm Password display appears below Enter Password display). 5Press Cursor up/down (5/.) keys or numeric keys on the remote to enter again password that you entered. MULTI CONTROL ENTER 6Press the ENTER key on “OK” icon. . Press PLAY key to resume normal playback. Operations 30 Set Up functions DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Password (continued) Change password Operations 2Press Cursor up/down (5/.) keys or numeric keys on the remote to enter password. Press the ENTER key on “OK” icon. 1Press Cursor up/down (5/.) keys on the remote to select Password on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER (Enter Password menu appears.) MULTI CONTROL ENTER 3Press Cursor up/down (5/.) keys to select Change Password, then press ENTER key. 4Press Cursor up/down (5/.) keys or numeric keys on the remote to enter password. MULTI CONTROL ENTER 5Press ENTER key to finish password input (Confirm Password display appears below Enter Password display). 6Press Cursor up/down (5/.) keys or numeric keys on the remote to enter again password that you entered. MULTI CONTROL ENTER 7Press the ENTER key on “OK” icon. . Press PLAY key to resume normal playback. 31Set Up functions 31Set Up functions DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Password (continued) DVD TV aspect Clear password 1Press Cursor up/down (5/.) keys on the remote to select TV Aspect on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER (TV Aspect menu appears.) . Press PLAY key to resume normal playback. 1Press Cursor up/down (5/.) keys on the remote to select Password on the set up menu display, then press the ENTER key. (Enter Password menu appears.) 2Press Cursor up/down (5/.) keys or numeric keys on the remote to enter password. Press the ENTER key on “OK” icon. 3Press Cursor up/down (5/.) keys to select Clear Password, then press ENTER key. MULTI CONTROL ENTER MULTI CONTROL ENTER . Press PLAY key to resume normal playback. 2Press Cursor up/down (5/.) keys on the remote to select TV Aspect menu, then press the ENTER key. Operations MULTI CONTROL ENTER 32 Set Up functions DVD Dynamic Range Operations 1Press Cursor up/down (5/.) keys on the remote to select Dynamic Range on the set up menu dis- play, then press the ENTER key. (Dynamic Range menu appears.) 2Press Cursor up/down (5/.) keys on the remote to select Dynamic Range mode (on or off), then press the ENTER key. . Press PLAY key to resume normal playback. MULTI CONTROL ENTER MULTI CONTROL ENTER DTS disclaimer clause When playing DTS-encoded (CDs, DVDs), excessive noise will be exhibited from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper pre-cautions when the analog stereo outputs of the DVD player is connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1 channel DTS Digital Surround™ decoder system must be connected to the digital output (S/P DIF, AES/EBU, or TosLink) of the DVD player. DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Digital Audio Out PCM : Choose this setting for all connection scenarios, except the Dolby Digital or DTS receiver or decoder connection. Dolby Digital : Choose this setting if you connected Dolby Digital receiver or decoder to your DVD player. DTS : Choose this setting if you connected DTS receiver or decoder to your DVD player For Europe and U.K. MPEG-2/DTS : Choose this setting if you connected DTS receiver, decoder or MPEG audio to your DVD player. 1Press Cursor up/down (5/.) keys on the remote to select Digital Audio Out on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER (Digital Audio Out display appears.) 2Press Cursor up/down (5/.) keys on the remote to select specific Digital Audio Out mode, then press the ENTER key. MULTI CONTROL ENTER . Press PLAY key to resume normal playback. NoteNote When the DTS of Digital Audio Out or the Dolby Digital setting and the format recorded on the disc are different from each other, audio may not be put out. Please switch according to the indication on the disc. 33Set Up functions Menu playback 33Set Up functions Menu playback DV-503/DVF-3550 (EN/K,P,T,M,X) DVD Linear PCM 96kHz => 48kHz : Even in case of 96 kHz digital signal, DVD will deliver 48 kHz signal out. 96kHz => 96kHz : In case of 96 kHz digital signal, DVD will deliver 96 kHz signal out. In this case your receiver should control 96 kHz signal. 1Press Cursor up/down (5/.) keys on the remote to select Linear PCM on the set up menu display, then press the ENTER key. MULTI CONTROL ENTER (Linear PCM display appears.) Menu playback VCDHierarchical structure of VCD menus When an item is selected on the menu screen during playback of a P.B.C.-compatible VCD, another menu with more details items...
Otros modelos de este manual:lector de DVD - DVF-3550 (2.08 mb)